Toshiba VF-S11 manual Operation mode parameters, E6581160

										E6581160
		Communication			Minimum
	Title		Function	Unit	setting unit		Adjustment range	Default	User		Reference
		No.			Panel/Commun			setting	setting		E6581158
					ication
	H	0273	Jumping width 2	Hz	0.1/0.01	0.0-30.0		0.0			6.10
	H	0274	Jump frequency 3	Hz	0.1/0.01	0.0-HJ		0.0
	H	0275	Jumping width 3	Hz	0.1/0.01	0.0-30.0		0.0
	H	0287	Preset-speed	Hz	0.1/0.01	NN-WN		0.0			5.14
			operation frequency
			8
	H	0288	Preset-speed	Hz	0.1/0.01	NN-WN		0.0
			operation frequency
			9
	H	0289	Preset-speed	Hz	0.1/0.01	NN-WN		0.0
			operation frequency
			10
	H	0290	Preset-speed	Hz	0.1/0.01	NN-WN		0.0
			operation frequency
			11
	H	0291	Preset-speed	Hz	0.1/0.01	NN-WN		0.0
			operation frequency
			12
	H	0292	Preset-speed	Hz	0.1/0.01	NN-WN		0.0
			operation frequency
			13
	H	0293	Preset-speed	Hz	0.1/0.01	NN-WN		0.0
			operation frequency
7			14
	H	0294	Preset-speed	Hz	0.1/0.01	NN-WN		0.0			5.14
			operation frequency								6.11.2
			15
			(Fire-speed)

•Operation mode parameters

	Communication			Minimum
Title		Function	Unit	setting unit	Adjustment range	Default	User	Reference
	No.			Panel/Commun		setting	setting	E6581158
				ication
H	0300	PWM carrier	kHz	0.1/0.1	2.0 - 16.0	12.0		6.12
		frequency
H	0301	Auto-restart	-	-	0: Disabled	0		6.13.1
		control selection			1: At auto-restart after momentary
					stop
					2: ST terminal on or off
					3: At auto-restart or when turning ST-
					CC on or off
					4: At start-up
H	0302	Regenerative	-	-	0: Disabled	0		6.13.2
		power ride-			1: Automatic setting
		through control			2: Slowdown stop
		(Deceleration
		stop)
H	0303	Retry selection	Times	1/1	0: Disabled	0		6.13.3
		(number of times)			1-10
H	0304	Dynamic braking	-	-	0: Disabled	0		6.13.4
		selection			1: Enabled (Resistor overload
					protection enabled)
H	0305	Overvoltage limit	-	-	0: Enabled	2		6.13.5
		operation			1: Disabled
		(Slowdown stop			2: Enabled (Quick deceleration)
		mode selection)			3: Enabled (Dynamic quick
					deceleration)

56