Toshiba VF-S11 manual Frequency parameters, E6581160

									E6581160
		Communication			Minimum
	Title		Function	Unit	setting unit	Adjustment range	Default	User		Reference
		No.			Panel/Commun		setting	setting		E6581158
					ication
	H	0139	Output terminal	-	-	0: H and H	0			6.3.4
			logic selection			H and H
			(RY-RC, OUT-			1: H or H
			NO)			H and H
						2: H and H
						H or H
						3: H or H
						H or H
	H	0167	Frequency	Hz	0.1/0.01	0.0-HJ	2.5			6.3.5
			command
			agreement
			detection range
	H	0170	Base frequency 2	Hz	0.1/0.01	25.0-500.0	50.0 (WP)			6.4.1
							60.0
							(WN, AN)
	H	0171	Base frequency	V	1/0.1	50-330 (240V class)	* 3
			voltage 2			50-660 (500/600V class)
	H	0172	Torque boost	%	0.1/0.1	0.0-30.0	* 1
			value 2
	H	0173	Motor electronic-	%	1/1	10-100	100			5.13
			thermal protection	(A)						6.4.1
			level 2
	H	0185	Stall prevention	%	1/1	10-199,	150			6.4.1
			level 2	(A)		200 (disabled)				6.19.2
7	*1 : Default values vary depending on the capacity. See the table of page 64.
	*3 : 230 (240V class), 460 (500V class), 575 (600V class)

•Frequency parameters

				Minimum
Title	Communication	Function	Unit	setting unit	Adjustment range	Default	User	Reference
	No.			Panel/Commun		setting	setting	E6581158
				ication
H	0200	Frequency priority	-	-	0: HOQF (Switchable to H by	0		6.5.1
		selection			terminal input)			7.1
					1: HOQF (Switchable to H at
					less than 1.0Hz of designated
					frequency)
H	0201	VIA input point 1	%	1/1	0-100	0		6.5.2
		setting
H	0202	VIA input point 1	Hz	0.1/0.01	0.0-500.0	0.0
		frequency
H	0203	VIA input point 2	%	1/1	0-100	100
		setting
H	0204	VIA input point 2	Hz	0.1/0.01	0.0-500.0	50.0 (WP)
		frequency				60.0
						(WN, AN)
H	0207	Frequency setting	-	-	0: Built-in potentiometer	1		6.3.5
		mode			1: VIA			6.5.1
		selection 2			2: VIB			7.1
					3: Operation panel
					4: Serial communication
					5: UP/DOWN from external contact
					6: VIA + VIB (Override)

54