Toshiba VF-S11 manual E6581160

							E6581160
Key operated		LED display				Operation
		W	Press the ENTER key to enable the user parameter automatic edit
			function.
		WH	Searches for parameters that are different in value from the standard
		（WT）	default setting and displays those parameters. Press the ENTER key
	or
		↓	or the	key to change the parameter displayed. (Pressing the					key
		CEE	moves the search in the reverse direction).
			Press the ENTER key to display the set value.
			Press the		key and	key to change set value.
			Press the ENTER key to save the changed value. The parameter
		⇔CEE	name and the programmed value will flash on and off alternately.
			After the change has been saved, “W“ is displayed.							4
		WH	Use the same steps as those given above to display parameters that
		（WT）	you want to search for or change setting with the				key and	key.
		ITW	When IT. W appears again, the search is ended.
		ITW	A search can be canceled by pressing the MODE key. Press the
	MODE
			MODE key once while the search is underway to return to the display
		↓
			of parameter setting mode.
		HTH
	MODE		After that you can press the MODE key to return to the status
		↓
			monitor mode or the standard monitor mode (display of operation
			frequency).

If there is anything you do not understand during this operation, press the MODE key several times to start over from the step of auh display.

4.2.4Searching for a history of changes, using the history function (CWJ)

History function (CWJ):

Automatically searches for 5 latest parameters that are programmed with values different from the standard default setting and displays them in the CWJ. Parameter setting can also be changed within this group CWJ.

Notes on operation

• If no history information is stored, this parameter is skipped and the next parameter “CWK” is displayed.

• JGCF and GPF are added respectively to the first and last parameters in a history of changes.

33