Toshiba VF-S11 manual , , , , , , , , , , , , , 

								E6581160
	Communication			Minimum
Title		Function	Unit	setting unit	Adjustment range	Default	User		Reference
	No.			Panel/Commun		setting	setting		E6581158
				ication
H	0609	Small current	%	1/1	1-20	10			6.19.7
		detection current
		hysteresis
H	0610	Small current	-	-	0: Alarm only	0
		trip/alarm			1: Tripping
		selection

H	0611	Small current	%	1/1	0-100
		detection current	(A)
H	0612	Small current	s	1/1	0-255
		detection time

0

0

H	0613	Detection of	-	-	0: Each time (standard pulse)	0
		output short-circuit			1: At start-up (only one time after
		during start-up			power is turned on)
					(standard pulse)
					2: Each time (short-time pulse)
					3: At start-up (only one time after
					power is turned on)
					(short-time pulse)
H	0615	Over-torque	-	-	0: Alarm only	0
		trip/alarm			1: Tripping
		selection
H	0616	Over-torque	%	1/1	0-250	150
		detection level

6.19.8

6.19.9

7

H	0618	Over-torque	s	0.1/0.1	0.0-10.0	0.5
		detection time
H	0619	Over-torque	%	1/1	0-100	10	6.19.9
		detection level
		hysteresis
H	0621	Cumulative	100	0.1/0.1	0.0-999.9	610	6.19.10
		operation time	Time	(=10 hours)
		alarm setting

H	0626	Over-voltage stall	%	1/1	100-150	*1	6.13.5
		protection level
H	0627	Undervoltage	-	-	0: Alarm only	0	6.19.12
		trip/alarm			(detection level below 60%)
		selection			1: Tripping
					(detection level below 60%)
					2: Alarm only
					(detection level below 50%,
					DC reactor necessary)
H	0633	Trip at VIA low	％	1/1	0: Disabled, 1-100	0	6.19.13
		level input mode
H	0634	Annual average	-	-	1: -10 to +10°C	3	6.19.14
		ambient			2: 11-20°C
		temperature (parts			3: 21-30°C
		replacement			4: 31-40°C
		alarms)			5: 41-50°C
					6: 51-60°C

*1 : Default values vary depending on the capacity. See the table of 64.

60