Toshiba VF-S11 manual E6581160

								E6581160
	Communication			Minimum
Title		Function	Unit	setting unit	Adjustment range	Default	User		Reference
	No.			Panel/Commun		setting	setting		E6581158
				ication
H	0307	Supply voltage	-	-	0: Supply voltage uncorrected, output	2			6.13.6
		correction			voltage limited	(WP, WN)
		(limitation of			1: Supply voltage corrected, output	3 (AN)
		output voltage)			voltage limited
					2: Supply voltage uncorrected, output
					voltage unlimited
					3: Supply voltage corrected, output
					voltage unlimited
H	0308	Dynamic braking	Ω	0.1/0.1	1.0-1000	* 1			6.13.4
		resistance
H	0309	Dynamic braking	kW	0.01/0.01	0.01-30.00	* 1			6.13.4
		resistor capacity
H	0311	Reverse-run	-	-	0: Forward/reverse run permitted	0			6.13.7
		prohibition			1: Reverse run prohibited
					2: Forward run prohibited
H	0312	Random mode	-	-	0: Disabled	0			6.12
					1: Automatic setting
H	0316	Carrier frequency	-	-	0: Carrier frequency not reduced	1			6.12
		control mode			automatically
		selection			1: Carrier frequency reduced
					automatically
					2: Carrier frequency not reduced
					automatically
					Support for 500V/600V models
					3: Carrier frequency reduced					7
					automatically
					Support for 500V/600V models
H	0320	Droop gain	％	1/1	0-100	0			6.14
H	0323	Droop insensitive	％	1/1	0-100	10			6.14
		torque band
H	0342	Braking mode	-	-	0: Disabled	0			6.15
		selection			1: Enabled (forward run)
					2: Enabled (reverse run)
					3: Enabled (operating direction)
H	0343	Release	Hz	0.1/0.01	H-20.0	3.0
		frequency
H	0344	Release time	s	0.01/0.01	0.00-2.50	0.05
H	0345	Creeping	Hz	0.1/0.01	H-20.0	3.0
		frequency
H	0346	Creeping time	s	0.01/0.01	0.00-2.50	0.10
H	0359	PID control	s	1/1	0-2400	0			6.16
		waiting time
H	0360	PID control	-	-	0: Disabled, 1: Enabled	0
H	0362	Proportional gain	-	0.01/0.01	0.01-100.0	0.30
H	0363	Integral gain	-	0.01/0.01	0.01-100.0	0.20
H	0366	Differential gain	-	0.01/0.01	0.00-2.5	0.00

*1 : Default values vary depending on the capacity. See the table of 64.

57