Toshiba VF-S11 manual E6581160, Mode

E6581160

5.1.2Display of detailed information on a past trip

Details on a past trip (of trips 1 to 4) can be displayed, as shown in the table below, by pressing the	key
when the trip record is selected in the status monitor mode.

Unlike the "Display of detailed trip information at the occurrence of a trip" in 5.2.2, details on a past trip can be displayed, even after the inverter is turned off or reset.

	Item displayed		Key	LED display		Description
		operated
Note 11	Past trip 1			QE⇔	Past trip 1 (displayed alternately)
	Continuous trips			P	The number of time the same trip occurred in succession is
					displayed. (Unit: times)
	Operation				The operation frequency when the trip occurred is
Note 1				Z6
	frequency				displayed.
	Direction of			HTH	The direction of rotation when the trip occurred is displayed.
	rotation				(HTH: Forward run, HTT: Reverse run)
	Operation				The operation command value when the trip occurred is
	frequency			H	displayed.
	command
					The inverter output current when the trip occurred is
Note 2	Load current			E
					displayed. (%/A)
					The inverter input voltage (DC) when the trip occurred is
Note 3	Input voltage			[
					displayed. (%/V).
	Output voltage			R	The inverter output voltage when the trip occurred is
					displayed. (%/V)
					The ON/OFF statuses of the control input terminals (F, R,
					RES, S1, S2, S3, VIB and VIA) are displayed in bits.
					ON: 	}}}ii}ii
					OFF: _
	Input terminal
Note 4				}}}ii}ii	VIA			F
					VIB			R
					S3			RES
					S2			S1
					The ON/OFF statuses of the control output terminals (RY,
					OUT and FL) are displayed in bits.
					ON: 
						0	}ii
Note 5	Output terminal			0 }ii	OFF: _
						FL	RY-RC
							OUT-NO
	Cumulative				The cumulative operation time when the trip occurred is
Note 9
				V 	displayed.
	operation time
					(0.01=1 hour, 1.00=100 hours)
	Past trip 1		MODE	QE⇔	Press this key to return to past trip 1.

5

39