Camera the Administrating

Tour Tab — Setting a Tour

Up to 16 positions can be programmed, and the camera moves to the programmed positions sequentially (Tour). Up to 5 groups can be set as the Tour.

Tour name

Select a tour name from among A, B, C, D and E.

Stay time

Type a period of time for which the camera is to stay at each preset position, between 1 and 3600 seconds.

Speed

Select the Pan speed from the list box. The camera pans faster with a higher number setting.

Sequence

Select and set preset number 1 to 16 for each of 16 list boxes.

The camera moves to the preset position saved in the selected preset number sequentially. The sequence of camera movement starts from the preset position specified in the list boxes from left to the right, then from top to bottom. After bottom right, the camera returns to top left. This sequence is cyclical.

If you select End in the list box, the program ends before this and the camera returns to the first preset position. This sequence is cyclical.

Tour table

You can check the contents of Tour settings on the another window.

Tour selection

You can activate the tour according to the schedule.

Selected tour name

Select the tour name A to E you want to activate. Select None if you do not want to activate any tour or if you want to stop the tour in action.

Effective period

Select the period for which the tour activates. Always: The tour can be activated any time.

Use scheduler: The tour is activated according to the schedule you have set.

Resume time on inactivity

You can operate PanTilt or Zoom during the tour, or select the tour activity after the preset activity by the alarm.

On: Specify the wait time before the tour restarts, between 5 and 600 seconds. The tour restarts automatically after the specified time has elapsed.

Off: The tour does not restart. None is displayed on Selected tour name.

64 Saving the Camera Position and Action — Preset position setting Menu