Camera the Administrating

Recording Images in Memory

— Image memory setting Menu

When you click Image memory on the Advanced mode menu, the Image memory setting menu appears.

By using the image memory function, you can record the image and audio file, which has been shot being linked with the external sensor input or with the built-in motion detection function, to the built-in memory (about 8 MB) of the camera or CF memory card. The image file can also be recorded periodically.

You can also record a still image periodically.

The recorded image and audio files can be found or downloaded to the computer using the FTP server function. (See “Sending an Image via mail — e-Mail (SMTP) setting Menu” on page 46.)

Image memory setting menu is composed of three tabs Common, Alarm recording and Periodical recording.

Notes

•The image and audio files recorded in the built-in memory will be erased when the power of the camera is turned off.

•The frame rate and operability on the main viewer may decrease during image storage in the memory.

•When you remove the CF memory card or you turn off the camera with the CF memory card inside, set Easy memory function to OFF.

•Format the CF memory card in the computer before use.

Common Tab — Setting the Image memory Function

Image memory

Set whether you use the Image memory function or not. When you select On, the Common setting options are

displays in the below. If you do not use it, select Off and click OK.

Built-in memory

It displays the free spaces of the built-in memory you can write in at present.

A-slot

It displays the free spaces of the CF memory card you can write in at present.

Selected root directory

Select a memory in which you want to save an image. Built-in memory: built-in memory of this camera

(approximately 8 MB)

A-slot:CF memory card inserted into the slot in the front side of the camera

Overwrite

Select to overwrite the file or not when there is insufficient memory space to record the image.

Capacity warning

Select On to send a warning mail to the Administrator when the built-in memory space is low or the memory is full. Select Off if you do not want to send a warning mail.

Note

When the Overwrite is set to On, a warning mail is not sent to the Administrator.

SMTP server name

Type the name of the SMTP server you want to use for sending the warning mail, up to 64 characters. Otherwise type the IP address of SMTP mail server.

Authentication

Select the authentication required when you send an alarm mail.

Off: Select if no authentication is necessary when an e- mail is sent.

On: When authentication is necessary an e-mail is sent, select one of the authentication methods from the followings.

SMTP: Select if authentication is necessary when an e-mail is sent.

POP before SMTP: Select when POP before SMTP

authentication is necessary when an e-mail is sent.

Note

When you set to On, be sure to select either or both SMTP or/and POP before SMTP.

52 Recording Images in Memory — Image memory setting Menu