3 Click BURN.

The “Writing Settings” dialog box appears. After confirming the writing speed is in the range of the writing speed of the CD-R/RW you are using, click [Start].

Recording starts.

Once recording has started, you cannot cancel it.

When recording is completed, “Writing process is complete” appears. Click [OK]. If you cannot click [OK], take out the CD-R/RW.

Note

Do not start up the SonicStage Simple Burner and other CD-R/RW burner software/OpenMG supporting software (SonicStage, OpenMG Jukebox, etc.) at the same time on your computer.

If the icon of other CD-R/RW burner software is displayed in the task tray, close that software.

If recording failed

Press BURN again and select a lower recording speed by clicking V in the “Writing Settings” dialog box.

Then click [START].

Checking information on the ATRAC CD inserted

If you insert an ATRAC CD into the CD-R/RW drive and click [Disc Info], you can get disc detailed information.

22