Recording was unsuccessful. (You cannot play

back the CD-R/RW you created on your CD player.)

Is the writing speed properly set?

t Depending on the CD-R/RW drive you use, the data transfer speed to the CD-R/RW drive may be lower than the writing speed so that recording will fail (Buffer Under Run

error). If this happens, click BURN to display the “Writing Settings” dialog box and set the writing speed lower. (page 22)

Are you performing operations other than burning a CD-R/RW on your computer? t Depending on the configuration of your computer, a Buffer Under Run error is likely to happen if you start up and use other applications while burning a CD-R/RW. When

making a CD-R/RW, make sure to stop other operations. Also be careful that the screen saver is turned off and your computer will not enter hibernation mode.

Are you using the proper CD-Rs/RWs for your CD-R/RW drive?

t Certain CD-R/RW drives are not capable of writing to certain CD-R/RW media. Use the CD-R/RW media recommended by the manufacturer of your CD-R/RW drive or those matching the writing speed.

Are there scratches or any damage on the surface of the CD-R/RW?

t If there is a scratch or dirt on the surface of the disc, recording will fail. When storing your discs, be careful they will not be damaged.

You cannot use the SonicStage Simple Burner.

Did you log on to your computer properly?

t To use this software, you have to log on as “Computer Administrator” or “Power User.” Consult with the computer administrator or log on again with a user name of “Computer Administrator” or “Power User.”

Did you change the user’s account while the software is running?

t Restart your computer with the name you used when started up the SonicStage Simple Burner and shut down your computer once.

34