Receiving Broadcasts
Receiving DAB/FM/AM broadcasts
Receiving broadcasts by scanning stations (Automatic Tuning)With automatic tuning you can quickly tune in a station without having to know its frequency.
BANDTUNING/SELECT
TUNING MODE
1 Press BAND repeatedly to select DAB, FM or AM for the desired type of broadcast.
When selecting DAB, “DAB Tuning” will appear in the display while the tuner is collecting DAB data. Please wait until this message disappears.
2 Press TUNING MODE to display AUTO.3 Turn TUNING/SELECT slightly and release it when the service component (DAB) or frequency (FM/AM) numbers start changing.
Turn the control to the right or left to tune in a service component (DAB) or frequency (FM/AM).
When the tuner locates a station, it stops automatically. “TUNED” appears in the display.
4 Repeat step 3 until you tune in the appropriate station.To store the station, operate steps 4 to 6 in “Storing stations manually” (page 12).
Notes
•When tuning in a DAB station, it may take a few seconds before you hear any sound.
•Before you can receive DAB, you must complete the DAB INIT SCAN procedure (see “Before you can receive DAB stations” on page 9).
If you cannot tune in the station you want (Manual Tuning)(FM/AM bands only)With manual tuning you can search through all stations broadcasting on each band, and tune in stations with extremely weak signals that you might not be able to receive with automatic tuning.
1 Press BAND repeatedly to select FM or AM for the desired type of broadcast.2 Press TUNING MODE so that “MANUAL” appears in the display.3 Turn TUNING/SELECT until you tune in the station you want.Turn the control to the right for a higher frequency; turn it to the left for a lower frequency.