Storing stations manually

This section shows you how to store up to 99 of your favorite DAB, 30 of FM or 30 of AM stations manually onto preset numbers.

BAND ENTER TUNING/SELECT

page 17). You will not have the stereo effect but the distortion will be reduced.

Notes

•When you preset a DAB or RDS station that is broadcasting station name information, the station name is automatically stored in the station preset.

•The DAB INIT SCAN procedure clears all DAB presets.

TUNING MODE

MEMORY

1 Press BAND repeatedly to select DAB, FM or AM for the desired type of broadcast.

2 Press TUNING MODE repeatedly so that the tuner is set to automatic or manual tuning mode.

Manual tuning mode is only available with FM and AM band reception.

3

4

Turn TUNING/SELECT to tune in the station you want to store.Press MEMORY.

“MEMORY” appears along with the preset number and the previously stored station. The default station presets are as follows: DAB: DAB01 (Empty), FM: FM01 87.50 MHz, AM: AM01 531 kHz.

5

6

7

Turn TUNING/SELECT to select the desired number.Press ENTER.

The tuner stores the service/station at the preset number. Any previously stored service/station is overwritten.

Repeat steps 1 through 6 to store other stations.

Tips

•To label a station, see “Naming preset stations” on page 16.

•When tuning in AM stations, adjust the direction of the AM loop aerial for optimum reception.

•If the STEREO indicator remains off, switch to stereo mode (see “Tips for better FM reception” on page 17).

•If an FM stereo programme seems distorted, switch to monaural (see “Tips for better FM reception” on

12GB