Basic menu operation
This tuner uses a menu entry system which allows you to operate various functions by following messages on the display. Use the following controls for basic menu operation.
TUNING/SELECT
MENU
| ENTER |
|
|
Use the | To |
|
|
MENU button | Enter/Exit menu mode. |
|
|
TUNING/SELECT | Display different items or |
control | settings. |
|
|
ENTER button | Select the currently displayed |
| item or setting. |
|
|
Before you can receive DAB stations
— DAB INIT SCAN
Before you can receive DAB, you must register the contents of broadcasts (service components) so that they can be received by the DAB tuner using the DAB Initialization Scan procedure.
POWER BAND MENU TUNING/SELECT
ENTER
1 Press POWER to turn on the tuner.
2 Press BAND repeatedly to select DAB.
“DAB Tuning” will appear in the display while the tuner is collecting DAB data. Please wait until this message disappears.
3 Press MENU.
4 Turn TUNING/SELECT to display “DAB INIT SCAN”.
5 Press ENTER.
6 Turn TUNING/SELECT to display “Yes”.
7 Press ENTER.
Scanning begins. Depending on the DAB services available in your area, this may take a few minutes.
8 When scanning is complete, “End” appears in the display momentarily and the tuner returns to normal operation.
Turn TUNING/SELECT to select a service.
Notes
•Do not press any button on the tuner or supplied remote during DAB INIT SCAN, except POWER.
•If you move to another area, repeat this procedure to store the stations for your new area.
•This procedure does not create any presets.
•This procedure clears all previously stored presets.
•For details on presets, see “Storing stations manually” on page 12.
Started Getting
9GB