Getting Started

Unpacking

Check that you received the following items with the tuner:

•Audio cord (1)

•AM loop aerial (1)

•FM wire aerial (1)

•DAB wire aerial (1)

•Remote commander (1)

•R6 (size AA) batteries (2)

Hooking up the system

Before you get started

•Turn off the power to all components before making any connections.

•Do not connect the AC power cord until all of the connections are completed.

•Be sure to make connections firmly to avoid hum and noise.

•When connecting an audio cord, be sure to match the colour-coded pins to the appropriate jacks: White (left) to White; and Red (right) to Red.

AM aerial hookups

This section describes how to connect the supplied AM loop aerial to the AM ANTENNA terminals. For the specific location of the terminals, see the illustration below.

AM ANTENNA

What will I need?

• AM loop aerial (supplied) (1)

1 Unwrap 2 lengths of the braided lead wire from around the frame of the aerial. Be careful to unwrap only the braided section of the lead wire. Do not unwrap more than 2 lengths of the lead wire. Also, be careful not to unbraid the lead wire.

Started Getting
continued

5GB