Press ENTER.
Press BAND repeatedly to select DAB. Press MENU.

Checking reception sensitivity

— DAB TUNE AID

(DAB only)

Allows you to check the DAB reception status. A numerical value is displayed as a guide for aerial adjustment. A higher numerical value indicates better reception. (Maximum value: 100)

1

2

3 Turn TUNING/SELECT to display “DAB TUNE AID”.

4

5 Turn TUNING/SELECT to change Channel label.

Check your local radio listings and select the appropriate frequency. Use the displayed number as a guide for where to best place your aerial. Try to position the aerial so that the numerical reading is 70 or higher. (For best results, a reading of 90 or higher is recommended.)

6 Press ENTER.

Notes

•No sound is output while the DAB TUNE AID function is being used.

•Depending on the broadcast stations available in your area, the numerical reading displayed may not be ideal.

•With readings below 70, DAB reception may be distorted.

Changing the display

DISPLAY

Display Information

You can check the status of this tuner and the information about the programme using the display.

When tuning in a DAB station

Each time you press DISPLAY, the display changes as follows:

Channel label (Normal display) t Ensemble label t PTY (Program Type) t Dynamic label segment t Timea) (in 24-hour system) t Frequency t Audio Infob) t Signal Qualityc) t Channel label t...

a)Time information appearing in the display is sent by the DAB station. As a result, the time may not be displayed properly if the station is located in a different time zone.

“--:--” will display until time information is received.

b)Audio information on bit rate (32kbps - 256kbps), signal type (stereo, dual, mono) and sampling type (F: 48kHz, H: 24kHz) is displayed.

Example: 128kbps stereo F

c)“Quality _ _ _” is displayed until information is received.

Note

When “STEREO” appears in the display, the current programme is broadcasted in the stereo/joint (intensity) stereo mode.

18GB