Amplifier Operation
Selecting the component
1 Rotate INPUT SELECTOR to select the input.
The selected input appears in the display.
To select the | Display |
VCR | VIDEO 1 or |
| VIDEO 2 |
|
|
Camcorder or TV game | VIDEO 3 |
|
|
DVD player | DVD |
|
|
Satellite tuner | TV/SAT |
|
|
MD or tape deck | MD/TAPE |
|
|
CD or Super Audio CD | |
player |
|
|
|
Tuner (FM) | |
|
|
Tuner (AM) | |
|
|
Turntable | PHONO |
|
|
2 Turn on the component and start playback.
3 Rotate MASTER VOLUME –/+ to adjust the volume.
To mute the sound
Press MUTING on the remote.
Notes on using headphones
•When headphones are connected, you can select only the following sound fields (page 32).
–HEADPHONE (2CH)
–HEADPHONE THEATER
•When headphones are connected and you use the MULTI CH IN function (see “Listening to multi channel sound”), the sound of all channels may not output depending on the speaker settings.
Listening to multi channel sound
— MULTI CH IN
You can select the audio directly from the components connected to the MULTI CH IN jacks. This enables you to enjoy high quality analog inputs like DVD or Super Audio CD. Also see “D.PWR” (page 38).
Surround effects are not activated when using this input.
Press MULTI CH IN.
When a center speaker or sub woofer is not connected
If you have set the center speaker to “NO” or “MIX”, or set the sub woofer to “NO” in the SP SETUP menu (page 17), and you activate the MULTI CH IN function, the analog center or sub woofer audio will be output from the front left and right speakers.
When MULTI CHANNEL DECODING indicator lights up
The MULTI CHANNEL DECODING indicator lights up when the receiver is decoding multi channel sources.
However, this indicator does not light up if you select 2CH STEREO mode.