Other Operations

Naming preset stations and inputs

You can enter a name of up to 8 characters for preset stations and inputs selected with INPUT SELECTOR, and display it in the receiver’s display.

To index a preset station

1 Rotate INPUT SELECTOR to select FM or AM.

2 Tune in the preset station you want to create an index name for (page 23).3 Press MAIN MENU repeatedly to select “TUNER”.4 Rotate MENU to select “NAME IN”.5 Press MEMORY/ENTER.

The cursor flashes and you can select a character. Follow the procedure of “To create an index name”.

To index an input

1 Rotate INPUT SELECTOR to select an input you want to create an index name for.

2 Press MAIN MENU repeatedly to select “CUSTOM”.3 Rotate MENU to select “NAME IN”.4 Press MEMORY/ENTER.

The cursor flashes and you can select a character. Follow the procedure of “To create an index name”.

To create an index name1 Use MENU and –/+ to create an index name.

Rotate –/+ to select a character, then rotate MENU to move the cursor to the next position.

Tips

•You can select the character type as follows by rotating –/+.

Alphabet (upper case) t Numbers t Symbols

•To enter a blank space, rotate –/+ until a blank space appears in the display.

•If you made a mistake, rotate MENU until the character you want to change flashes, then rotate –/+ to select the correct character.

2 Press MEMORY/ENTER.

The entered name is registered.

Note (Models of area code CEL, CEK only)

When you name an RDS station and tune in the station, the Program Service (PS) name appears instead of the name you entered. (You cannot change the name of a Program Service (PS) name. The name you entered will be overwritten by the Program Service (PS) name.)

Operations Other
41GB