Using the Sleep Timer
You can set the receiver to turn off automatically at a specified time. Use the remote for the operation.
1 Press ALT to light up the button.2 Press SLEEP while the power is on.Each time you press SLEEP, the display changes cyclically as follows:
2:00:00 t 1:30:00 t 1:00:00 t 0:30:00 t OFF
While using Sleep Timer, “SLEEP” lights up in the display.
Tip
To check the remaining time before the receiver turns off, press ALT to light up the button (page 46), then press SLEEP. The remaining time appears in the display. If you press SLEEP again, the sleep timer will be canceled.
Selecting the speaker system
You can select the front speaker system you want to use.
Press SPEAKERS (OFF/A/B/A+B) repeatedly to select the front speaker system you want to use.
The selected speaker system appears in the display. To turn off the speaker output, press SPEAKERS (OFF/A/B/A+B) repeatedly until SP A and SP B indication turn off.
The speaker system•SP A
The speakers connected to the FRONT SPEAKERS A terminals.
•SP B
The speakers connected to the FRONT SPEAKERS B terminals.
•SP A and SP B
The speakers connected to both the FRONT SPEAKERS A and B terminals (parallel connection). In this case, be sure to connect front speakers with a nominal impedance of 8
ohms or higher, and set the IMPEDANCE SELECTOR to “4Ω”.