Receiver Operations

1Press one of the Function buttons to select the component you want to use.

The Function buttons on the remote are factory- set as follows:

To listen to or watch

Press

 

 

Radio programs

TUNER

 

 

Compact discs (CD)

CD/SACD

 

 

MiniDisc (MD) or

MD/TAPE and FN SHIFT*

Audio tapes

(INITIAL-MD MODE)

 

 

TV programs or

TV/SAT

Satellite receiver

(INITIAL-TV MODE)

 

 

VHS Video tapes

VIDEO

(VTR-3 mode)

 

 

 

DVD player/

DVD/LD

Dolby Digital decoder

(INITIAL-DVD MODE)

with MULTI CH OUTPUT

 

 

 

*VIDEO 1, VIDEO 2, VIDEO 3, PHONO and MD/TAPE function is a 2- key operation. To select the above function, press FN SHIFT (function shift) and the function key you want simultaneously. For example, press FN SHIFT and CD/SACD to select MD/TAPE function.

If you want to change the factory setting of a button, see the next section.

The receiver and the selected component turn on.

If the component does not turn on

Press the power switch on the component.

2Start playing.

Refer to “Remote Button Descriptions” on page 25 for details.

Changing the factory setting of a function button

If the factory settings of the FUNCTION buttons don’t match your system components, you can change them. For example, if you have an MD player and a tape deck and you don’t have a CD player, you can assign the CD/SACD button to your tape deck.

Note that the settings of the TUNER and FN SHIFT functions (VIDEO 1, VIDEO 2, VIDEO 3, PHONO and MD/TAPE) cannot be changed.

1Hold down the Function button whose function you want to change (for example, CD/SACD).

2Press the corresponding button of the component you want to assign to the Function button (for example, 4 – Tape deck).

AV ?/1

?/1

Function buttons

Numeric buttons

>10 ENTER

.

MASTER VOL –

The following buttons are assigned to select the functions:

To operate

Press

 

 

CD player

1

 

 

DAT deck

2

 

 

MD deck

3

 

 

Tape deck A

4

 

 

Tape deck B

5

 

 

LD player

6

 

 

VCR (remote control mode VTR 1*)

7

 

 

VCR (remote control mode VTR 2*)

8

 

 

VCR (remote control mode VTR 3*)

9

 

 

TV

0

 

 

DSS (Digital Satellite System)

>10

 

 

DVD

ENTER

 

 

VCD player

.

 

 

*Sony VCRs are operated with a VTR 1, 2 or 3 setting. These correspond to Beta, 8mm and VHS respectively.

Now you can use the CD/SACD button to control the tape deck.

To reset a button to its factory setting

Repeat the above procedure.

To reset all the function buttons to their factory setting

Press ?/1, AV ?/1 and MASTER VOL – at the same time.

11GB