AC Hookups
Connecting the AC power cordConnect the AC power cord from this receiver and from your audio/video components to a wall outlet.
,
to a wall outlet
Where do I go next?
Before you use the receiver, go to the next section to make sure that all the controls are set to the appropriate positions.
Getting Started
Before You Use Your Receiver
Before you use your receiver for the first time or when you want to clear the receiver's memory, do the procedure below:
?/1 (power)
DIMMER | MUTING |
1Turn off the receiver.
2Press ?/1 (power) for more than 4 seconds. “INITIAL” appears in the display and the items including the following are reset or cleared:
•All preset stations are reset to their factory settings.
•All sound field parameters are reset to their factory settings.
•All index names (of preset stations and program sources) are cleared.
•All adjustments made with the SET UP button are reset to their factory settings.
•The sound field memorized for each program source and preset station is cleared.
Turn on the receiver and check the following indicator.
•Press MUTING if MUTING appears on the display.
•Press DIMMER repeatedly to set the display at any of four levels of brightness.
9GB