Lets you adjust the level of the surround right speaker.
Sub woofer level (S.W. XXX dB)Lets you adjust the level of the sub woofer.
LFE (Low Frequency Effect) mix level (L.F.E. XXX dB)Lets you attenuate the level of the LFE (Low Frequency Effect) channel output from the sub woofer without effecting the level of the bass frequencies sent to the sub woofer from the front, center or surround channels via the Dolby Digital or DTS bass redirection circuitry.
•For LFE mix level, “0 dB” outputs the full LFE signal at the mix level determined by the recording engineer.
•To mute the sound of the LFE channel from the sub woofer, select “OFF”. However, the low frequency sounds of the front, center, or surround speakers are output from the sub woofer according to the settings made for each speaker in the speaker setup (pages
D. RANGE
COMP. XXX)Lets you compress the dynamic range of the sound track. This may be useful when you want to watch movies at low volumes late at night. We recommend using the “MAX” setting.
•To reproduce the sound track with no compression, select “OFF”.
•To reproduce the sound track with the dynamic range intended by the recording engineer, select “STD”.
•To compress the dynamic range in small steps to achieve the sound you desire, select “0.1”– “0.9”.
•To reproduce a dramatic compression of the dynamic range, select “MAX”.
Note
Dynamic range compression is possible with Dolby Digital sources only.
The BASS +/– and TREBLE +/– button lets you adjust the tone (bass or treble) of the front speakers for optimum sound. You can adjust the tone for each separate sound field.
1 Start playing a program source encoded with multi channel surround sound.
2 Press BASS +/– or TREBLE +/– to adjust the tone.The setting is stored automatically.
Initial settings
Parameter | Initial setting |
BASS | 0 dB |
|
|
TREB. | 0 dB |
|
|
Lets you adjust the bass tone.
TREB. (Treble)Lets you adjust the treble tone.
Resetting customized sound fields to the factory settings1 If the power is on, press ?/1 to turn off the power.2 Hold down MODE and press ?/1.“SF. CLR.” appears in the display and all sound fields are reset at once.