Recording (continued)Recording on a video tape

You can record from a VCR, a TV, a DVD player or an LD player using the receiver. You can also add audio from a variety of audio sources when editing a video tape. See the operating instructions of your VCR or LD player if you need help.

1 Select the program source to be recorded.

2 Prepare the component for playing.

For example, insert the laser disc you want to record into the LD player.

3 Insert a blank video tape into the VCR (VIDEO 1) for recording.4 Start recording on the recording VCR,then start playing the video tape or laser disc you want to record.

Tip

You can record the sound from any audio source onto a video tape while copying from a video tape or laser disc. Locate the point where you want to start recording from another audio source, select the program source, then start playback. The audio from that source will be recorded onto the audio track of the video tape instead of the audio from the original medium. To resume audio recording from the original medium, select the video source again.

Notes

Make sure to make both digital and analog connections to the VIDEO 2 and DVD/LD inputs. Analog recording is not possible if you make only digital connections.

When MULTI CH IN is selected analog audio signals of the current function is output from the REC OUT jacks.

Using the Sleep Timer

You can set the receiver to turn off automatically at a specified time.

Press SLEEP on the remote while the power is on.

Each time you press the button, the display changes cyclically as follows:

2-00-00 t1-30-00 t1-00-00 t0-30-00

tOFF

The display dims after you have specified the time.

Tips

You can freely specify the time. After pressing SLEEP, specify the time you want using the MENU

/or MENU +/– on the receiver. The sleep time changes in 1 minute intervals. You can specify up to 5 hours.

To check the remaining time before the receiver turns off, press SLEEP. The remaining time appears in the display.

Adjustments using the SET

UP button

The SET UP button allows you to make the following adjustments.

1 Press SET UP.

2 Press MENU or MENU to select

the parameter you want to adjust.

3 Press MENU + or MENU – to select the setting you want.

The setting is entered automatically.

4 Repeat steps 2 and 3 until you have set all of the parameters that follow.

32GB