Changing the factory

setting of a function button

If the factory settings of the FUNCTION buttons do not match your system components, you can change them. For example, if you have a tape deck and you do not have an MD deck, you can assign the MD/TAPE button to your tape deck.

Note that the settings of the TUNER button cannot be changed.

1 Hold down the Function button whose function you want to change (for example, MD/TAPE).

2 Press the corresponding button of the component you want to assign to the Function button (for example, 4 – Tape deck).

The following buttons are assigned to select the functions:

To operate

Press

CD player

1

 

 

DAT deck

2

 

 

MD deck

3

 

 

Tape deck A

4

 

 

Tape deck B

5

 

 

LD player

6

 

 

VCR (command mode VTR 1*)

7

 

 

VCR (command mode VTR 2*)

8

 

 

VCR (command mode VTR 3*)

9

 

 

TV

0

 

 

DSS (Digital Satellite Receiver)

>10

 

 

DVD

ENTER

 

 

VCD player

.

 

 

*Sony VCRs are operated with a VTR 1, 2 or 3 setting. These correspond to Beta, 8mm and VHS respectively.

Now you can use the MD/TAPE button to control the tape deck.

To reset a button to its factory setting

Repeat the above procedure.

To reset all the function buttons to their factory setting

Press ?/1, AV ?/1 and MASTER VOL – at the same time.

Using Operations Remote the U306-RM

37GB