About the indications in the display
1 | 2 | 3 | 4 |
| 5 | 6 | 7 |
|
| |||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| SW |
| L F E | SP A | ;DIGITAL |
| ;PRO LOGIC II | DTS |
|
|
| RDS MEMORY |
| |||||||||||
|
|
|
|
|
| SP B | SLEEP OPT | COAX |
|
|
|
| STEREO MONO |
|
| |||||||||
|
|
|
|
|
|
|
| D.RANGE |
|
|
| |||||||||||||
| L | C | R |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
| SL | S | SR |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| qs |
|
|
| qa 0 9 |
|
| 8 |
|
|
|
|
| |||||||||
Operation Amplifier
ASW: Lights up when sub woofer selection is set to “YES” (page 18) and audio signal is output from the SUB WOOFER jack.
BLFE: Lights up when the disc being played back contains the LFE (Low Frequency Effect) channel and the LFE channel signal is actually being reproduced.
CSP A/SP B: Lights up in accordance with the speaker system being used (A or B). Turns off when speaker output is turned off or when headphones are connected.
D; DIGITAL: Lights up when the receiver is decoding signals recorded in the Dolby Digital format.
E; PRO LOGIC II: “; PRO LOGIC” lights up when the receiver applies Pro Logic processing to 2 channel signals in order to output the center and surround channel signals. “; PRO LOGIC II” lights up when the Pro Logic II Movie/Music decoder is activated. However, both indicators do not light up if both the center and surround speakers are set to “NO” and “A.F.D. AUTO”, “DOLBY PL”, “PLII MOV” or “PLII MUS” is selected.
Note
Dolby Pro Logic and Dolby Pro Logic II decoding do not function for DTS format signals.
FDTS: Lights up when DTS signals are input.
Note
When playing a DTS format disc, be sure that you have made digital connections and that INPUT MODE is not set to “ANALOG” (page 31).
GTuner indicators: Lights up when using the receiver to tune in radio stations, etc. See pages
Note
“RDS” appears for models of area code CEL, CEK only.
HD.RANGE: Lights up when dynamic range compression is activated (page 32).
ICOAX: Lights up when the source signal is a digital signal being input through the COAXIAL terminal.
JOPT: Lights up when the source signal is a digital signal being input through the OPTICAL terminal.
KSLEEP: Lights up when sleep timer is activated.
LPlayback channel indicators: The letters (L, C, R, etc.) indicate the channels being played back. The boxes around the letters vary to show how the receiver downmixes the source sound (based on the speakers settings).
L (Front Left), R (Front Right), C (Center (monaural)), SL (Surround Left), SR (Surround Right), S (Surround (monaural or the surround components obtained by Pro Logic processing))
Example:
Recording format (Front /Surround): 3/2
Output channel: Surround speakers absent
Sound Field: A.F.D. AUTO
L C RSL SR