Models of other area code
Rated Power Output at Stereo Mode
(8 ohms 1 kHz, THD 0.7%)
80 W + 80 W1)
Reference Power Output1) (8 ohms 1 kHz, THD 10%)
FRONT2): 100 W/ch
CENTER2): 100 W
SURR2): 100 W/ch
1) Measured under the following conditions:
Area code | Power requirements |
SP, CEL, CEK, KR | 230 V AC, 50 Hz |
|
|
E2/E3, AU | 240 V AC, 50 Hz |
|
|
TW | 110 V AC, 60 Hz |
|
|
2)Depending on the sound field settings and the source, there may be no sound output.
3)Measured under the following conditions:
Area code | Power requirements |
KR | 220 V AC, 50 Hz |
|
|
Frequency response |
|
|
|
MULTI CH IN, | 10 Hz – 70 kHz |
DVD, VIDEO 1, 2 | field and tone bypassed) |
|
|
Inputs (Analog) |
|
|
|
MULTI CH IN, | Sensitivity: 500 mV |
Impedance: 50 kiloohms | |
DVD, VIDEO 1, 2 | S/N4): 96 dB |
| (A, 500 mV5)) |
4)INPUT SHORT (with sound field and tone bypassed).
5)Weighted network, input level.
Inputs (Digital)
DVD (Coaxial) | Sensitivity: – |
| Impedance: 75 ohms |
| S/N: 100 dB |
| (A, 20 kHz LPF) |
|
|
VIDEO 2, | Sensitivity: – |
(Optical) | Impedance: – |
| S/N: 100 dB |
| (A, 20 kHz LPF) |
|
|
Outputs (Analog) |
|
|
|
MD/TAPE (OUT), | Voltage: 500 mV |
VIDEO 1 (AUDIO OUT) | Impedance: 10 kiloohms |
|
|
SUB WOOFER | Voltage: 2 V |
| Impedance: 1 kiloohms |
|
|
TONE |
|
|
|
Gain levels | ±6 dB, 1 dB step |
|
|
| FM tuner section |
|
Tuning range | 87.5 - 108.0 MHz |
Antenna | FM wire antenna |
Antenna terminals | 75 ohms, unbalanced |
Intermediate frequency | 10.7 MHz |
Sensitivity |
|
Mono: | 18.3 dBf, 2.2 µV/75 ohms |
Stereo: | 38.3 dBf, 22.5 µV/75 ohms |
Useable sensitivity | 11.2 dBf, 1 µV/75 ohms |
S/N |
|
Mono: | 76 dB |
Stereo: | 70 dB |
Harmonic distortion at 1 kHz | |
Mono: | 0.3% |
Stereo: | 0.5% |
Separation | 45 dB at 1 kHz |
Frequency response | 30 Hz – 15 kHz, |
| |
Selectivity | 60 dB at 400 kHz |