
Remote | Operations | Function |
Button |
|
|
|
|
|
O wh | DVD player | Returns to the previous |
|
| menu or exits the menu. |
|
|
|
V/v/B/b | DVD player | Selects a menu item. |
wh |
|
|
|
|
|
Notes
•When you press the input buttons (VIDEO 1, VIDEO 2, DVD), the input mode of the TV might not switch to the corresponding input mode that you want. In this case, press the TV/VIDEO button to switch the input mode of the TV.
•Some functions explained in this section may not work depending on the model of the receiver.
•The above explanation is intended to serve as an example only. Therefore, depending on the component the above operation may not be possible or may operate differently than described.
If the factory settings of the input buttons do not match your system components, you can change them. For example, if you have a tape deck and you do not have an MD deck, you can assign the MD/TAPE button to your tape deck.
Note that the settings of the TUNER button cannot be changed.
1 Hold down the input button whose input you want to change (for example, MD/ TAPE).
2 Press the corresponding button of the component you want to assign to the input button (for example, 4 – Tape deck).
The following buttons are assigned to select the input:
To operate | Press |
CD player | 1 |
|
|
DAT deck | 2 |
|
|
MD deck | 3 |
|
|
Tape deck A | 4 |
|
|
Tape deck B | 5 |
|
|
LD player | 6 |
|
|
VCR (command mode VTR 1*) | 7 |
|
|
VCR (command mode VTR 2*) | 8 |
|
|
VCR (command mode VTR 3*) | 9 |
|
|
TV | 0 |
|
|
DSS (Digital Satellite Receiver) | >10 |
|
|
DVD player | ENTER |
|
|
VCD player | . |
|
|
*Sony VCRs are operated with a VTR 1, 2 or 3 setting. These correspond to Beta, 8mm and VHS respectively.
Now you can use the MD/TAPE button to control the tape deck.
To reset a button to its factory settingRepeat the above procedure.
To reset all the input buttons to their factory settingPress ?/1, AV ?/1 and MASTER VOL – at the same time.