Manuals / Brands / Home Audio / Stereo Receiver / Sony / Home Audio / Stereo Receiver

Sony STR-DH510 Notes on connecting cables, Notes on HDMI connections

1 80

Download 80 pages, 1.22 Mb

25GB

Connections

Notes on connecting cables

• Use a High Speed HDMI cable. If you use a

Standard HDMI cable, 1080p or Deep

Colour (Deep Color) images may not be

displayed properly.

• Sony recommends that you use an HDMI

authorized cable or Sony HDMI cable.

• We do not recommend using an HDMI-DVI

conversion cable. When you connect an

HDMI-DVI conversion cable to a DVI-D

component, the sound and/or the image may

not be output. Connect other audio cords or

digital connecting cords, then set

“A. ASSIGN” in AUDIO menu (page 63)

when the sound is not output correctly.

Notes on HDMI connections

• An audio signal input to the HDMI IN jack

is output from the SPEAKERS jacks and

HDMI TV OUT jack. It is not output from

any other audio jacks.

• Video signals input to the HDMI IN jack can

only be output from the HDMI TV OUT

jack. The video input signals cannot be

output from the VIDEO OUT jacks or

MONITOR OUT jacks.

• When you want to listen to the sound from

the TV speaker, set “AUDIO.OUT” to

“TV+AMP” in the HDMI menu (page 64). If

you cannot play back multi channel

software, set to “AMP”. However, the sound

will not output from the TV speaker.

• Be sure to turn on the receiver when video

and audio signals of a playback component

are being output to a TV through this

receiver. If you set “PASS.TRHU” to

“OFF”, video and audio signal will not be

transmitted when the power is set to off.

• DSD signals of Super Audio CD are not

input and output.

• The multi/stereo area audio signals of a

Super Audio CD are not output.

• Audio signals (sampling frequency, bit

length, etc.) transmitted from an HDMI jack

may be suppressed by the connected

component. Check the setup of the

connected component if the image is poor or

the sound does not come out of a component

connected via the HDMI cable.

• Sound may be interrupted when the

sampling frequency, the number of channels

or audio format of audio output signals from

the playback component is switched.

• When the connected component is not

compatible with copyright protection

technology (HDCP), the image and/or the

sound from the HDMI TV OUT jack may be

distorted or may not be output.

In this case, check the specification of the

connected component.

• The image resolution of player may need

certain settings be made before you can

enjoy multi channel Linear PCM. Refer to

the operating instructions of the player.

• Not every HDMI component supports all

functions that are defined by the specified

HDMI version. For example, components

that support HDMI, version 1.4, may not

support Audio Return Channel (ARC).

• Refer to the operating instructions of each

connected component for details.

Contents

Main To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. For customers in the United States WARNING Owners Record Important Safety Instructions CAUTION For customers in Europe For customers in Australia About This Manual On Copyrights About area codes Table of Contents Connections Preparing the Receiver Basic Operations Tuner Operations Supplied accessories Description and location of parts Front panel 54312 qs 89q;qa 67 Indicators on the display q; 9 8 1234 56 7 Page Rear panel 6 5 1 132 1, 2 4 AAudio signal section Remote commander Using the SHIFT (Q) and TV (R) button To control the receiver To control a Sony TV Press and hold TV (R) and then press the yellow printing button to select the function you want. Page To control other Sony components Inserting batteries into the remote 1: Installing the speakers Example of a 5.1 channel speaker system configuration Connections Note Tips 2: Connecting the speakers Before connecting the cords, be sure to disconnect the AC power cord (mains lead). Subwoofer*Surround speaker LeftRight FRONT 3: Connecting the TV Before connecting cords, be sure to disconnect the AC power cord (mains lead). b) a) CE Tip 4a: Connecting the audio components Notes on connecting DIGITAL MEDIA PORT adapter BVideo cord (not supplied) To detach the DIGITAL MEDIA PORT adapter from DMPORT jack 4b: Connecting the video components If you want to connect several digital components, but cannot find an unused input HDMI features Components to be connected Connecting components with HDMI jacks AAA AHDMI cable (not supplied) Notes on connecting cables Notes on HDMI connections The following illustration shows how to connect a DVD player or DVD recorder. ACoaxial digital cord (not supplied) Connecting a DVD player, DVD recorder AD B*C DVD player, DVD recorder Audio signals Video signals Connecting a Satellite tuner, Cable TV tuner BA CD SAT Video signalsAudio signals D Connecting components with analog video and audio jack VCR, DVD recorder Audio signals Video signals AVideo cord (not supplied) BAudio cord (not supplied) 5: Connecting the antennas (aerials) To the wall outlet FRONT 6: Connecting the AC power cord (mains lead) Connect the AC power cord (mains lead) to a wall outlet. Initializing the receiver 1 receiver. 2 Calibrating the appropriate speaker settings automatically 1 microphone to the AUTO CAL MIC jack. 2 microphone. 2 Error and warning codes To cancel Auto Calibration After you have finished When error codes appear To rectify the error Error codes and remedies When warning codes appear To change the settings manually 1 2 3 4 5 Adjusting the speaker levels (TEST TONE) 2 LEVEL, then press or b. 3 Playback 1 4 2 3 5 1 to select the input you want to create an index name for. 2 3 SYSTEM, then press or b. 4 Using the Sleep Timer media 2 3 4 Listening to FM/AM radio 1 select the FM or AM band. 2 Using the controls on the receiver 1 2 3 4 If you cannot tune in a station 1 2 3 Tuning into a station directly (Direct Tuning) Changing the AM tuning scale Presetting FM/AM radio stations 1 2 3 4 1 Naming preset stations 2 Using the controls on the receiver 1 2 3 4 5 6 Using the Radio Data System (RDS) (Models of area code ECE, CEK, AU1 only) 2 channel sound mode Receiving RDS broadcasts Selecting the sound field xA.DIRECT (Analog direct) Movie mode xA.F.D. AUTO (A.F.D. Auto) xMULTI ST. (Multi Stereo) When headphones are connected Page Page What is BRAVIA Sync? Preparing for the BRAVIA Sync If your TV is compatible with the Control for HDMI-Easy Setting function 1 2 Playing back components with one-touch operation (One-Touch Play) Enjoying the TV sound from the speakers connected to the receiver Sets System Audio (System Audio Control) Turns on (if in Control to on standby mode) Switches to appropriate HDMI input Minimizes TV Outputs TV volume sound Turning off the receiver with the TV (System Power Off) Press and hold TV, then press TV ?/1. Enjoying movies with the optimum sound field (Theater/Theatre Mode Sync) Enjoying the TV sound via an HDMI cable (Audio Return Channel) 2 Switching between digital and analog audio Advanced Operations (INPUT MODE) 1 2 Enjoying the sound from other inputs 2 3 4 5 Assigning input jacks Enjoying sound/images from the components connected to the DIGITAL MEDIA PORT 1 2 component. Using the setting menu Overview of the menus Advanced Operations Page (Models of area code ECE, CEK, AU1 only ) LEVEL menu xT. TON E Adjusting the speaker level SPEAKER menu 3/2 1. xFRT SIZE xCNT SIZE xSUR SIZE xFL DIST. xFR DIST. xCNT DIST. SURROUND menu EQ menu xFM MODE xNAME IN xA/V SYNC xDUAL HDMI menu xCTRL.HDMI xPASS.THRU xAUDIO.O UT xSW LEVEL SYSTEM menu xSW L.P.F. xARC Changing the input button assignments 1 button of which you want to change the assignment, hold down AV ?/1. 2 release the input button you selected in step 1. Clearing all the contents of the remotes memory 2 RM-AAU071 only RM-AAU074 only Glossary xDeep Colour (Deep Color) xDigital Cinema Sound (DCS) xDolby Digital xDolby Pro Logic II xDolby Surround (Dolby Pro Logic) Precautions On safety On power sources On heat buildup On placement Troubleshooting Audio Page Video Tuner Control for HDMI Remote commander Others Error messages Specifications FM tuner section AM tuner section Video section General Design and specifications are subject to change without notice. Index