Sony STR-DH510 Video

72GB

There is no sound, or only a very low-

level sound is heard from the center/

surround.

• Select a CINEMA STUDIO EX mode

(page 43).

•Check that the speaker settings are

appropriate using the AUTO CAL menu

or “PATTERN” in the SPEAKER menu.

Then check that sound is output from each

speaker correctly, using “T. TONE” in the

LEVEL menu.

•Adjust the speaker level (page 34).

There is no sound from the subwoofer.

•Check that the subwoofer is connected

correctly and securely.

•Make sure you have turned on your

subwoofer.

•Depending on the selected sound field, no

sound output from the subwoofer.

•Check “PATTERN” in the SPEAKER

menu (page 60).

The surround effect cannot be

obtained.

•Make sure you have selected the sound

field for movie or music mode (page 43).

•Sound fields do not function for signals

with a sampling frequency of more than

48 kHz.

Dolby Digital or DTS multi channel

sound is not reproduced.

•Check that the DVD, etc. you are playing

is recorded in Dolby Digital or DTS

format.

• When connecting the DVD player, etc., to

the digital input jacks of this receiver,

check the audio setting (the settings for the

audio output) of the connected component.

For example, when connecting the

“PlayStation 3”, set the BD/DVD audio

output format to “Bitstream” on the

“PlayStation 3”.

•Set “AUDIO. OUT” to “AMP” in the

HDMI menu.

Recording cannot be carried out.

•Check that the components are connected

correctly.

• Select the source component using the

input buttons.

There is no sound from the component

connected to the DIGITAL MEDIA

PORT adapter.

• Adjust the volume of this receiver.

• The DIGITAL MEDIA PORT adapter

and/or component is not connected

correctly. Turn off the receiver, then

reconnect the DIGITAL MEDIA PORT

adapter and/or component.

• Check the DIGITAL MEDIA PORT

adapter and/or component device to make

sure it supports this receiver.

There is no picture or an unclear

picture appears on the TV screen or

monitor.

• Select the appropriate input using the input

buttons.

• Set your TV to the appropriate input mode.

• Move your audio components away from

the TV.

• Depending on the DIGITAL MEDIA

PORT adapter, video output may not be

possible.

The source image input to the VIDEO IN

or COMPONENT VIDEO IN jacks is not

output from the TV.

• Check that your component is connected

to the MONITOR OUT jack (page 20).

• Make sure “CTRL.HDMI” is set to

“CTRL OFF” in HDMI menu (page 58).

The source image input to the HDMI

jack is not output from the TV.

• Check the HDMI connection (page 23).

• Depending on the playback component,

you may need to set up the component.

Refer to the operating instructions

supplied with each component.

• Be sure to use a High Speed HDMI cable

when you view images or listen to sound

during Deep Colour (Deep color)

transmission.

Video

Contents

Main To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. For customers in the United States WARNING Owners Record Important Safety Instructions CAUTION For customers in Europe For customers in Australia About This Manual On Copyrights About area codes Table of Contents Connections Preparing the Receiver Basic Operations Tuner Operations Supplied accessories Description and location of parts Front panel 54312 qs 89q;qa 67 Indicators on the display q; 9 8 1234 56 7 Page Rear panel 6 5 1 132 1, 2 4 AAudio signal section Remote commander Using the SHIFT (Q) and TV (R) button To control the receiver To control a Sony TV Press and hold TV (R) and then press the yellow printing button to select the function you want. Page To control other Sony components Inserting batteries into the remote 1: Installing the speakers Example of a 5.1 channel speaker system configuration Connections Note Tips 2: Connecting the speakers Before connecting the cords, be sure to disconnect the AC power cord (mains lead). Subwoofer*Surround speaker LeftRight FRONT 3: Connecting the TV Before connecting cords, be sure to disconnect the AC power cord (mains lead). b) a) CE Tip 4a: Connecting the audio components Notes on connecting DIGITAL MEDIA PORT adapter BVideo cord (not supplied) To detach the DIGITAL MEDIA PORT adapter from DMPORT jack 4b: Connecting the video components If you want to connect several digital components, but cannot find an unused input HDMI features Components to be connected Connecting components with HDMI jacks AAA AHDMI cable (not supplied) Notes on connecting cables Notes on HDMI connections The following illustration shows how to connect a DVD player or DVD recorder. ACoaxial digital cord (not supplied) Connecting a DVD player, DVD recorder AD B*C DVD player, DVD recorder Audio signals Video signals Connecting a Satellite tuner, Cable TV tuner BA CD SAT Video signalsAudio signals D Connecting components with analog video and audio jack VCR, DVD recorder Audio signals Video signals AVideo cord (not supplied) BAudio cord (not supplied) 5: Connecting the antennas (aerials) To the wall outlet FRONT 6: Connecting the AC power cord (mains lead) Connect the AC power cord (mains lead) to a wall outlet. Initializing the receiver 1 receiver. 2 Calibrating the appropriate speaker settings automatically 1 microphone to the AUTO CAL MIC jack. 2 microphone. 2 Error and warning codes To cancel Auto Calibration After you have finished When error codes appear To rectify the error Error codes and remedies When warning codes appear To change the settings manually 1 2 3 4 5 Adjusting the speaker levels (TEST TONE) 2 LEVEL, then press or b. 3 Playback 1 4 2 3 5 1 to select the input you want to create an index name for. 2 3 SYSTEM, then press or b. 4 Using the Sleep Timer media 2 3 4 Listening to FM/AM radio 1 select the FM or AM band. 2 Using the controls on the receiver 1 2 3 4 If you cannot tune in a station 1 2 3 Tuning into a station directly (Direct Tuning) Changing the AM tuning scale Presetting FM/AM radio stations 1 2 3 4 1 Naming preset stations 2 Using the controls on the receiver 1 2 3 4 5 6 Using the Radio Data System (RDS) (Models of area code ECE, CEK, AU1 only) 2 channel sound mode Receiving RDS broadcasts Selecting the sound field xA.DIRECT (Analog direct) Movie mode xA.F.D. AUTO (A.F.D. Auto) xMULTI ST. (Multi Stereo) When headphones are connected Page Page What is BRAVIA Sync? Preparing for the BRAVIA Sync If your TV is compatible with the Control for HDMI-Easy Setting function 1 2 Playing back components with one-touch operation (One-Touch Play) Enjoying the TV sound from the speakers connected to the receiver Sets System Audio (System Audio Control) Turns on (if in Control to on standby mode) Switches to appropriate HDMI input Minimizes TV Outputs TV volume sound Turning off the receiver with the TV (System Power Off) Press and hold TV, then press TV ?/1. Enjoying movies with the optimum sound field (Theater/Theatre Mode Sync) Enjoying the TV sound via an HDMI cable (Audio Return Channel) 2 Switching between digital and analog audio Advanced Operations (INPUT MODE) 1 2 Enjoying the sound from other inputs 2 3 4 5 Assigning input jacks Enjoying sound/images from the components connected to the DIGITAL MEDIA PORT 1 2 component. Using the setting menu Overview of the menus Advanced Operations Page (Models of area code ECE, CEK, AU1 only ) LEVEL menu xT. TON E Adjusting the speaker level SPEAKER menu 3/2 1. xFRT SIZE xCNT SIZE xSUR SIZE xFL DIST. xFR DIST. xCNT DIST. SURROUND menu EQ menu xFM MODE xNAME IN xA/V SYNC xDUAL HDMI menu xCTRL.HDMI xPASS.THRU xAUDIO.O UT xSW LEVEL SYSTEM menu xSW L.P.F. xARC Changing the input button assignments 1 button of which you want to change the assignment, hold down AV ?/1. 2 release the input button you selected in step 1. Clearing all the contents of the remotes memory 2 RM-AAU071 only RM-AAU074 only Glossary xDeep Colour (Deep Color) xDigital Cinema Sound (DCS) xDolby Digital xDolby Pro Logic II xDolby Surround (Dolby Pro Logic) Precautions On safety On power sources On heat buildup On placement Troubleshooting Audio Page Video Tuner Control for HDMI Remote commander Others Error messages Specifications FM tuner section AM tuner section Video section General Design and specifications are subject to change without notice. Index