63GB
Advanced Operations
You can set the FM station receiving mode and
name the preset stations.
xFM MODE
•STEREO
This receiver will decode the signal as stereo
signal when the radio station is broadcast in
stereo.
• MONO
This receiver will decode the signal as mono
signal regardless of the broadcast signal.
xNAME IN
Lets you set the name of preset stations. For
details, see “Naming preset stations” (page
41).
You can make settings for the audio to suit
your preference.
xA/V SYNC
Lets you delay the output of audio to minimize
the time gap between audio output and visual
display.
• SYNC ON (Delay time: 60 ms)
The audio output is delayed so that the time
gap between the audio output and visual
display is minimized.
• SYNC OFF (Delay time: 0 ms)
The audio output is not delayed.
Notes
•This parameter is useful when you use a large LCD
or plasma monitor or a projector.
•This parameter is valid only when you use a sound
field selected with the 2CH or A.F.D. buttons.
•This function does not work in the following cases:
–signals with a sampling frequency of more than
48 kHz is input.
–the multi channel Linear PCM signals are received
via an HDMI IN jack.
–Analog Direct function is selected (page 42).
xDUAL
Lets you select the language you want to listen
to during digital broadcast. This feature only
functions for Dolby Digital sources.
• MAIN/SUB
Sound of the main language will be output
through the front left speaker and sound of
the sub language will be output through the
front right speaker simultaneously.
•MAIN
Sound of the main language will be output.
•SUB
Sound of the sub language will be output.
xDEC. PRIO
Lets you specify the input mode for the digital
signal input to the DIGITAL IN jacks or
HDMI IN jacks.
• DEC. AUTO
Automatically switches the input mode
between DTS, Dolby Digital, or PCM.
•DEC. PCM
When signals from the DIGITAL IN jack are
selected, PCM signals are given priority (to
prevent interruption when playback starts).
However, when other signals are input, there
may be no sound, depending on the format.
In this case, set this item to “DEC. AUTO”.
When signals from the HDMI IN jack are
selected, only PCM signals are output from
the connected player. When signals in any
other format are received, set this item to
“DEC. AUTO”.
Notes
• Even when “DEC. PRIO” is set to “DEC.
PCM”, the sound may be interrupted at the very
beginning of the first track depending on the CD
being played back.
• When playback DTS CD, set “DEC. PRIO” to
“DEC. AUTO”.
xA. ASSIGN
Lets you assign the digital audio input to other
input source. For details, see “Enjoying the
sound from other inputs” (page 53).
TUNER menuAUDIO menucontinued