39GB
D:\NORM'S JOB\SONY HA\SO0086\STR-DN610_PMRF 2\GB\GB05BAS_STR-DN610-U2.fm masterpage: Right
STR-DN610
4-167-824-13(1)
Basic Operations
Using the Sleep Timer
You can set the receiver to turn off
automatically at a specified time.
1Press AMP MENU.
2Press V/v repeatedly to select
“SYSTEM”, then press or b.
3Press V/v repeatedly to select
“SLEEP”, then press or b.
4Press V/v repeatedly to select
the preset time you want, then
press .
The display changes as follows:
OFF y 0-30-00 y 1-00-00 y
1-30-00 y 2-00-00
When sleep timer is being used, the
“SLEEP” indicator lights up in the display.
Tips
• To check the remaining time before the receiver
turns off, repeat steps 1 to 3. The remaining time
appears on the display.
• A count down is displayed 1 minute before the
receiver turns off.
Recording
You can record from a video/audio component
using the receiver. Refer to the operating
instructions supplied with your recording
component.
You can record onto a CD-R using the
receiver. Refer to the operating instructions
supplied with your CD recorder.
1Press one of the input buttons
to select the playback
component.
You can also use INPUT SELECTOR
+/– on the receiver.
2Prepare the playback
component for playing.
For example, tune to the radio station you
want to record (page 40).
3Prepare the recording
component.
Insert a blank CD-R into the CD recorder
and adjust the recording level.
4Start recording on the
recording component, then
start playback on the playback
component.
Note
Sound adjustments do not affect the signal output
from the SA-CD/CD/CD-R AUDIO OUT jacks.
MENU
O
AMP
MENU
,
V/v/B/b