4 Press TEST TONE again to turn off the test tone.
Tip
You can adjust the level of all speakers at the same time. Press MASTER VOL +/– or turn MASTER VOLUME on the receiver.
Note
The adjusted value are shown in the display during adjustment.
Checking the connections
After connecting all of your components to the receiver, do the following to verify that the connections were made correctly.
1
2 Turn on the component that you connected (e.g., DVD player or VCR).
3 Press the input selector button (e.g., DVD or VIDEO) to select the component (program source).
4 Start playing.
If you do not obtain normal sound output after performing this procedure, see “Troubleshooting” on page 35 and take the appropriate measures to correct the problem.
Tip
You can also use INPUT SELECTOR on the receiver to select the component.
Basic Operations
Selecting the component
INPUT SELECTOR
Press INPUT SELECTOR repeatedly to select the component you want to use.
To select | Display/light up |
VCR | VIDEO |
|
|
DVD player | DVD |
|
|
Satellite tuner | TV/SAT |
|
|
Built in tuner | TUNER |
|
|
After turning on the component you selected, select the component and play the program source.
•After selecting VCR or DVD player, turn on the TV and set the TV’s video input to match the component you selected.
MUTING
Press MUTING to mute the sound. “MUTING” appears on the display when the sound is muted. To cancel muting, press it again or turn up the volume.
The muting function is also canceled when you turn the power off or disconnect the power cord.
Operations Basic