Receiving Broadcasts
Before receiving broadcasts, make sure you have connected FM and AM antennas to the receiver (see page 6).
Storing FM stations automatically
(AUTOBETICAL)
(Models of area code CEL only)
This function lets you store up to 30 FM and FM RDS stations in alphabetical order without redundancy. Additionally, it only stores the stations with the clearest signals.
If you want to store FM or AM stations one by one, see “Presetting radio stations” on page 26.
1 Press ?/1 to turn off the receiver.
2 Hold down INPUT SELECTOR on the receiver and press ?/1 on the receiver to turn the receiver back on.
For RDS stations, the tuner first checks for stations broadcasting the same program, then stores only the one with the clearest signal. The selected RDS stations are sorted alphabetically by their Program Service name, then assigned a
Regular FM stations are assigned
When done, “FINISH” appears in the display momentarily and the receiver returns to the normal operation.
Notes
•Do not press any button on the receiver or supplied remote during autobetical operation.
•If you move to another area, repeat this procedure to store stations in your new area.
•For details on tuning the stored stations, see page 26.
•If you move the antenna after storing stations with this procedure, the stored settings may no longer be valid. If this happens, repeat this procedure to store the stations again.
1 b 0 b 2 b 5 b 0
Example 2: AM 1350 kHz
1 b 3 b 5 b 0
If you cannot tune in a station and the entered numbers flash
Make sure you’ve entered the right frequency. If not, repeat steps 2 and 3.
If the entered numbers still flash, the frequency is not used in your area.