Manuals / Brands / Home Audio / Stereo System / Sony / Home Audio / Stereo System

Sony STR-V333ES, STR-V444ES FM tuner section, AM tuner section, Video section

1 68

Download 68 pages, 853 Kb

59

Additional Information

FM tuner section

Tuning range 87.5 - 108.0 MHz

Antenna terminals

75 ohms, unbalanced

Sensitivity Mono: 18.3 dBf,

2.2 µV/75 ohms

Stereo: 38.3 dBf,

22.5 µV/75 ohms

Usable sensitivity

11.2 dBf, 1 µV/75 ohms

S/N Mono: 76 dB

Stereo: 70 dB

Harmonic distortion at 1 kHz

Mono: 0.3%

Stereo: 0.5%

Separation 45 dB at 1 kHz

Frequency response

30 Hz – 15 kHz

+0.5/–2 dB

Selectivity 60 dB at 400 kHz

AM tuner section

Tuning range With 10-kHz tuning

scale:

530 – 1710 kHz4)

With 9-kHz tuning

scale:

531 – 1710 kHz4)

Antenna Loop antenna

Usable sensitivity

50 dB/m (at 1,000 kHz

or 999 kHz)

S/N 54 dB (at 50 mV/m)

Harmonic distortion

0.5 % (50 mV/m,

400 kHz)

Selectivity At 9 kHz: 35 dB

At 10 kHz: 40 dB

4) You can change the AM tuning scale to

10 kHz y 9 kHz. After tuning in any AM

station, turn off the receiver. Hold down the

TUNING + button and press the ?/1

button. All preset stations will be erased

when you change the tuning scale. To reset

the scale to 10 kHz (or 9 kHz), repeat the

procedure.

Video section

Inputs Video: 1 Vp-p 75 ohms

S-video:

Y: 1 Vp-p 75 ohms

C: 0.286 Vp-p

75 ohms

Component video

(STR-V444ES):

Y: 1 Vp-p 75 ohms

B-Y: 1 Vp-p 75 ohms

R-Y: 1 Vp-p 75 ohms

Outputs Video: 1 Vp-p 75 ohms

S-video:

Y: 1 Vp-p 75 ohms

C: 0.286 Vp-p

75 ohms

Component video

(STR-V444ES):

Y: 1 Vp-p 75 ohms

B-Y: 1 Vp-p 75 ohms

R-Y: 1 Vp-p 75 ohms

Contents

Main WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. For customers in the United States INFORMATION CAUTION About This Manual TABLE OF CONTENTS Hooking Up the Components 4 Hooking Up and Setting Up the Speaker System 14 Location of Parts and Basic Operations 24 Enjoying Surround Sound 29 Hooking Up the Components Unpacking Inserting batteries into the remote z Before you get started Antenna Hookups Notes on antenna hookups z INOUT INPUT OUTPUT Audio Component Hookups Turntable MD/DAT deck INPUT OUTPUTINPUT Video Component Hookups Camcorder or video game TV monitor Yellow (video) Yellow (video) White (L/audio) White (L/audio) Red (R/audio) Red (R/audio) DVD/LD VIDEO IN DIGITAL DVD/LD IN (COAXIAL) (OPTICAL) AC-3 RF OUT Digital Component Hookups TV or satellite tuner Example of LD player connected via an RF demodulator Yellow (video) Yellow (video) White (L/audio) White (L/audio) Red (R/audio) Red (R/audio) * * MD or DAT deck Yellow Yellow INPUT OUTPUT INOUT CD Player* 5.1CH Input Hookups Two for the 5.1CH INPUT FRONT and REAR jacks Monaural audio cords (not supplied) Two for the 5.1CH INPUT CENTER and SUB WOOFER jacks Black Black Video cord (not supplied) b Monitor This function is not available when 5.1CH INPUT is selected. Speaker (L) Speaker (R) CONTROL A1 hookup COMPONENT VIDEO hookup (STR-V444ES only) S-LINK CONTROL S hookup Other Hookups * Connecting the AC power cord 1/u SET UP + Jog dial Hooking Up and Setting Up the Speaker System Brief descriptions of buttons and control used to set up the speaker system Cursor buttons Hooking Up and Setting Up the Speaker System Front speaker (R) Front speaker (L) Speaker System Hookup Rear speaker (R) Rear speaker (L) Center speaker (Rear center speaker) () Black ] (+)(+) () Black Speaker impedance Speaker System Hookup To avoid short-circuiting the speakers Befor e turning on the receiver Clearing the receivers memory Performing Initial Setup Operations Performing initial setup operations Multi Channel Surround Setup z Specifying the speaker parameters 2 5 z Multi Channel Surround Setup z Adjusting the speaker volume 2 3 4 z Multi Channel Surround Setup Before You Use Your Receiver Befor e turning on the receiver Checking the connections 2 3 4 Location of Parts and Basic Operations Location of Parts and Basic Amplifier Operations 5FUNCTION control Rotate to select the component you want to use. To select Rotate to light After selecting the component, turn on the component you selected and play the program source. 1 Page Front Panel Parts Description * Enjoying Surround Sound Selecting a Sound Field 1 z z 6.1 channel matrix decoding Brief descriptions of buttons used to enjoy surround sound Page Page Page Selecting a Sound Field Use the buttons on the front panel to operate the following modes Understanding the Multi-Channel Surround Displays Customizing Sound Fields To get the most from multi channel surround sound Adjusting the surround parameters 2 Page Adjusting the level parameters 2 Adjusting the equalizer 2 z Resetting customized sound fields to the factory settings 1 2 Adjustable parameters for each sound field Page Page < EQUALIZER (BANK) > < REAR L/R > < REAR CENTER > B.GAIN B.FREQ M.GAIN M.FREQ M.SLOPE T.GAIN T.FREQ B.GAIN B.FREQ M.GAIN M.FREQ M.SLOPE T.GAIN T.FREQ Receiving Broadcasts This chapter describes how to receive FM or AM broadcasts and how to preset selected stations. Brief descriptions of buttons used to receive broadcasts Direct Tuning 2 3 4 5 6 z Automatic Tuning 2 3 4 Preset Tuning Presetting radio stations 2 Other Operations Brief descriptions of buttons that appear in this chapter Recording Recording on an audio tape or MiniDisc 1 2 3 4 Using the Sleep Timer z Adjustments Using the SET UP Button Power to video circuitry 3 2 3 2 3 Selecting the command mode of the remote 2 3 Selecting the color of the on-screen display 2 3 CONTROL A1 Control System Getting Started Connections Basic Functions 1 2 3 4 Troubleshooting Additional Information Reference sections for clearing the receivers memory Specifications AUDIO POWER SPECIFICATIONS Amplifier section FM tuner section AM tuner section Video section General Specifications Glossary Tables of Settings Using SURROUND, LEVEL, EQ, and SET UP buttons Page Tables of Settings Using SURROUND, LEVEL, EQ, and SET UP buttons Index A B C D