Whirlpool GZ5730XR, GZ5736XR Range Hood Use, Range Hood Care, Operation, Cleaning and Maintenance

RANGE HOOD USE

Operation

Hood control panel

A			B
LOW	HIGH	LOW	HIGH
FAN			LIGHT

A. Fan switch

B. Light switch

Operating the fan

A 3-position rocker switch controls the fan. The left position is low speed, center position is off, and the right position is high speed. An indicator light shows that the fan is on.

Operating the light

A 3-position rocker switch controls the lights. The left position is low light intensity, center position is off, and the right position is high light intensity.

Replacing the light bulbs

Before you begin, make sure that the range hood is turned off and that the lamps have had sufficient time to cool. Halogen bulbs burn extremely hot. See bulb packaging for further information.

Replace with (2) PAR20, 50W maximum halogen bulbs or

(2) R16, 40W maximum incandescent bulbs.

RANGE HOOD CARE

Cleaning and Maintenance

Be sure lights are cool before cleaning the hood.

To clean hood

1.Disconnect power.

2.Remove filters.

3.Use a damp cloth and a mild detergent to wipe all grease- laden surfaces. Use care when cleaning fan blade - it must not become bent or misaligned. Do not allow water to enter the motor.

4.Make sure all surfaces are completely dry before replacing filters.

5.Reconnect power.

Motor is permanently lubricated. Do not oil or disassemble motor.

Aluminum mesh filters

Clean often using hot water and a mild detergent. Filters are dishwasher safe.

Charcoal filters (non-vented installations)

■Clean filter surfaces frequently with a damp cloth and mild detergent. Do not immerse filters in water or put in dishwasher.

■Special blue and yellow strips will blend to green when it is time to change the filter. These strips work best when facing toward the cooking surface.

■30" (76.2 cm) Filter Kit No. 4396291 or 36" (91.4 cm) Filter Kit No. 4396292 is available from your dealer.

10