52
Other Operations

Adjustments Using the SET UP Button

Power to video circuitry

“AUTO OFF” turns off the power of video circuits
automatically when there are unnecessary. You can enjoy
the sound without the influence of the video circuits.
“ALWAYS ON” keeps the power of video circuits on.
Depending on the moniter, noise may be produced or the
picture may be distorted when the power of the video
circuits is turned on. In this case, select “ALWAYS ON”.
The default setting is “AUTO OFF”.
1Press SET UP.
2Press the cursor buttons ( or ) to select “V.
POWER”.
3Turn the jog dial to select “AUTO OFF” or “ALWAYS
ON”.

Sound Field Link

When set to “ON”, the sound field that was last applied to
a program source is automatically applied whenever it is
selected. For example, if you listen to CD with STADIUM
as the sound field, change to a different program source,
then return to CD, STADIUM will be applied again. If you
do not want to use this function, set to “OFF”. The default
setting is “ON”.
1Press SET UP.
2Press the cursor buttons ( or ) to select “S. F
LINK”.
3Turn the jog dial to select “ON” or “OFF”.

Adjusting the CONTROL A1 auto

function

Turning on the CONTROL A1 auto function parameter
lets you turn Sony components connected via CONTROL
A1 cords (see page 12) on automatically when you press
the corresponding function button.
Auto function is set to ON by default.
1Press SET UP.
2Press the cursor buttons ( or ) to select “AUTO
FUNCTION.”
3Turn the jog dial to select “ON” or “OFF.”
The SET UP button allows you to make the following
adjustments.

Selecting the 5.1CH video input

This parameter lets you specify the video input to be used
with the audio signals from the 5.1CH INPUT jack. The
5.1CH video input is set to DVD/LD by default.
1Press SET UP.
2Press the cursor buttons ( or ) to select
“5.1CH V :”.
3Turn the jog dial to select the video input you
want.

Power to digital circuitry

“AUTO OFF” turns off the power of the unnecessary
digital circuits automatically when you use analog inputs
or functions like ANALOG DIRECT that bypass digital
processing. You can enjoy the analog source without the
influence of digital circuits. “ALWAYS ON” keeps the
power of digital circuits on. Select when set to AUTO OFF
and you do not like the time lag when digital circuits are
turned on, etc. The default setting is “AUTO OFF”.
1Press SET UP.
2Press the cursor buttons ( or ) to select “D.
POWER”.
3Turn the jog dial to select “AUTO OFF” or “ALWAYS
ON”.