Sony STR-V333ES, STR-V444ES Specifications

58

Additional Information

Specifications

AUDIO POWER

SPECIFICATIONS

POWER OUTPUT AND

TOTAL HARMONIC

DISTORTION:

With 8 ohm loads, both

channels driven, from 20 -

20,000 Hz; rated 120 watts

per channel minimum RMS

power, with no more than

0.05 % total harmonic

distortion from 250

milliwatts to rated output

(USA model only).

Amplifier section

POWER OUTPUT

Rated Power Output at Stereo Mode

(8 ohms 20 Hz – 20 kHz, THD 0.05 %)

STR-V444ES 120 W + 120 W

STR-V333ES 110 W + 110 W

(4 ohms 20 Hz – 20 kHz, THD 0.09 %)

STR-V444ES 100 W + 100 W

STR-V333ES 90 W + 90 W

Reference Power Output

(8 ohms 20 Hz – 20 kHz, THD 0.05 %)

STR-V444ES FRONT1):

120 W + 120 W

CENTER1): 120 W

REAR1):

120 W + 120 W

STR-V333ES FRONT1):

110 W + 110 W

CENTER1): 110 W

REAR1):

110 W + 110 W

(4 ohms 20 Hz – 20 kHz, THD 0.09 %)

STR-V444ES FRONT:1)

100 W + 100 W

CENTER1): 100 W

REAR1):

100 W + 100 W

STR-V333ES FRONT:1)

90 W + 90 W

CENTER1): 90 W

REAR1):

90 W + 90 W

1) Depending on the sound field settings and

the source, there may be no sound output.

Frequency response

PHONO: RIAA

equalization curve

±0.5 dB

CD, TAPE, MD/DAT,

DVD/LD, TV/SAT,

VIDEO 1, 2, and

VIDEO 3:

10 Hz – 100 kHz

+0.5/–3 dB (with

sound field and

equalizer bypassed)

Inputs (Analog)PHONO:

Sensitivity: 2.5 mV

Impedance:

50 kilohms

S/N2): 86 dB

(A, 2.5 mV3))

5.1CH INPUT, CD,

TAPE, MD/DAT,

DVD/LD, TV/SAT,

VIDEO 1, 2, and

VIDEO 3:

Sensitivity: 150 mV

Impedance:

50 kilohms

S/N2): 96 dB

(A, 150 mV3))

2) INPUT SHORT

3) Weighted network, input level

Inputs (Digital)DVD/LD IN, CD IN

(STR-V444ES)

(Coaxial):

Sensitivity: –

Impedance: 75 ohms

S/N: 100 dB

(A, 20 kHz LPF)

DVD/LD IN, TV/SAT

IN, CD IN, MD/

DAT IN (Optical):

Sensitivity: –

Impedance: –

S/N: 100 dB

(A, 20 kHz LPF)

Outputs (Analog)

TAPE, MD/DAT (REC

OUT); VIDEO 1, 2

(AUDIO OUT), 2ND

AV (STR-V444ES),

2ND AUDIO

(STR-V333ES):

Voltage: 150 mV,

Impedance:

1 kilohms

FRONT L/R, CENTER,

REAR L/R,

SUB WOOFER:

Voltage: 2 V

Impedance:

1 kilohms

PHONES:

Accepts low- and

high-impedance

headphones

Outputs (Digital)

MD/DAT (Optical)

Sampling Frequency

48 kHz

EQ BASS:

99 Hz~1.0 kHz

(21 steps)

MID:

198 Hz~10 kHz

(37 steps)

TREBLE:

1.0 kHz~10 kHz

(23 steps)

Gain levels:

±10 dB, 1 dB step

Contents

Main WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. For customers in the United States INFORMATION CAUTION About This Manual TABLE OF CONTENTS Hooking Up the Components 4 Hooking Up and Setting Up the Speaker System 14 Location of Parts and Basic Operations 24 Enjoying Surround Sound 29 Hooking Up the Components Unpacking Inserting batteries into the remote z Before you get started Antenna Hookups Notes on antenna hookups z INOUT INPUT OUTPUT Audio Component Hookups Turntable MD/DAT deck INPUT OUTPUTINPUT Video Component Hookups Camcorder or video game TV monitor Yellow (video) Yellow (video) White (L/audio) White (L/audio) Red (R/audio) Red (R/audio) DVD/LD VIDEO IN DIGITAL DVD/LD IN (COAXIAL) (OPTICAL) AC-3 RF OUT Digital Component Hookups TV or satellite tuner Example of LD player connected via an RF demodulator Yellow (video) Yellow (video) White (L/audio) White (L/audio) Red (R/audio) Red (R/audio) * * MD or DAT deck Yellow Yellow INPUT OUTPUT INOUT CD Player* 5.1CH Input Hookups Two for the 5.1CH INPUT FRONT and REAR jacks Monaural audio cords (not supplied) Two for the 5.1CH INPUT CENTER and SUB WOOFER jacks Black Black Video cord (not supplied) b Monitor This function is not available when 5.1CH INPUT is selected. Speaker (L) Speaker (R) CONTROL A1 hookup COMPONENT VIDEO hookup (STR-V444ES only) S-LINK CONTROL S hookup Other Hookups * Connecting the AC power cord 1/u SET UP + Jog dial Hooking Up and Setting Up the Speaker System Brief descriptions of buttons and control used to set up the speaker system Cursor buttons Hooking Up and Setting Up the Speaker System Front speaker (R) Front speaker (L) Speaker System Hookup Rear speaker (R) Rear speaker (L) Center speaker (Rear center speaker) () Black ] (+)(+) () Black Speaker impedance Speaker System Hookup To avoid short-circuiting the speakers Befor e turning on the receiver Clearing the receivers memory Performing Initial Setup Operations Performing initial setup operations Multi Channel Surround Setup z Specifying the speaker parameters 2 5 z Multi Channel Surround Setup z Adjusting the speaker volume 2 3 4 z Multi Channel Surround Setup Before You Use Your Receiver Befor e turning on the receiver Checking the connections 2 3 4 Location of Parts and Basic Operations Location of Parts and Basic Amplifier Operations 5FUNCTION control Rotate to select the component you want to use. To select Rotate to light After selecting the component, turn on the component you selected and play the program source. 1 Page Front Panel Parts Description * Enjoying Surround Sound Selecting a Sound Field 1 z z 6.1 channel matrix decoding Brief descriptions of buttons used to enjoy surround sound Page Page Page Selecting a Sound Field Use the buttons on the front panel to operate the following modes Understanding the Multi-Channel Surround Displays Customizing Sound Fields To get the most from multi channel surround sound Adjusting the surround parameters 2 Page Adjusting the level parameters 2 Adjusting the equalizer 2 z Resetting customized sound fields to the factory settings 1 2 Adjustable parameters for each sound field Page Page < EQUALIZER (BANK) > < REAR L/R > < REAR CENTER > B.GAIN B.FREQ M.GAIN M.FREQ M.SLOPE T.GAIN T.FREQ B.GAIN B.FREQ M.GAIN M.FREQ M.SLOPE T.GAIN T.FREQ Receiving Broadcasts This chapter describes how to receive FM or AM broadcasts and how to preset selected stations. Brief descriptions of buttons used to receive broadcasts Direct Tuning 2 3 4 5 6 z Automatic Tuning 2 3 4 Preset Tuning Presetting radio stations 2 Other Operations Brief descriptions of buttons that appear in this chapter Recording Recording on an audio tape or MiniDisc 1 2 3 4 Using the Sleep Timer z Adjustments Using the SET UP Button Power to video circuitry 3 2 3 2 3 Selecting the command mode of the remote 2 3 Selecting the color of the on-screen display 2 3 CONTROL A1 Control System Getting Started Connections Basic Functions 1 2 3 4 Troubleshooting Additional Information Reference sections for clearing the receivers memory Specifications AUDIO POWER SPECIFICATIONS Amplifier section FM tuner section AM tuner section Video section General Specifications Glossary Tables of Settings Using SURROUND, LEVEL, EQ, and SET UP buttons Page Tables of Settings Using SURROUND, LEVEL, EQ, and SET UP buttons Index A B C D