FAQs |
| |
| ||
|
|
|
10. What do I do if my |
| Contact a Local Heating & Cooling service person or visit our website at |
system is not working |
| |
properly and I need service? |
|
|
|
|
|
11. What does CHCK PAD |
| This feature displays the words CHCK PAD (check humidifier) after a set time of humidifier |
on the display mean and |
| operation. This is a reminder to maintain or clean your humidifier. When CHCK PAD is |
how do I reset it? |
| displayed, you can clear it by pressing the SERVICE button. |
|
|
|
12.When I push the |
| HUMD MX indicates the humidifier has not reached the current humidity setting in the last |
Humidity button, the |
| 10 heating cycles. If the condition persists, a service person may recommend additional |
display shows HUMD MX. |
| humidifier capacity. |
What does this mean? |
|
|
|
|
|
13.Why does the system run |
| In cooling, as the room temperature falls you will eventually reach the setpoint temperature. |
with the setpoint and room |
| The system will continue to run until it reaches the low side of the temperature setting. As |
temperature the same? |
| an example: If set to 78 degrees with the room temperature falling the thermostat will |
|
| continue to call for cool as the temperature decreases in the following manner. 78.9, 78.8, |
|
| 78.7, 78.6, 78.5, 78.4, 78.3, 78.2, at approximately 78.2 the thermostat will quit calling for |
|
| cool. This is why it is not unusual for the room temperature and set temperature to read the |
|
| same but the system continues to run. The amount of time it takes for the system to shut off |
|
|
|
| 29 |
FAQs