Emerson 1F95-391 manual Programming, Manual Operation, PROGRAMMED OPERATION Planning Your Program

PROGRAMMING

MANUAL OPERATION

(Bypassing the Program) Your White-Rodgers 90 Series thermostat can be used to control temperature manually (without programming). For manual operation,

press SYSTEM to select HEAT or

COOL, then press PROGRAM

HOLD Use or to set the temperature as desired.

PROGRAMMED OPERATION Planning Your Program

The sample schedule (pages 14 & 15) shows the factory-installed programs for heating and cooling. The heating and cooling programs are separate, and must be programmed individually. To use the factory program, set the clock and press PROGRAM RUN

with the thermostat set to Heat, Cool, or Auto. Fill out the blank schedules (pages 16 & 17) with the time and temperatures you want in your program. Fill in every space for your program.The same temperature can be repeated more than once if you do not want the temperature to change over several time periods. This is useful for homes or businesses that are occupied all day and only want a setback temperature at night.

Entering Your Program

To Set the Clock:

1.Press PROGRAM RUN .

2.Press SET TIME . The display will show the hour. Use TIME FWD or TIME BACK to set to the current hour and AM/PM designation.

3.Press SET TIME again. The display will show minutes. Use TIME FWD or TIME BACK to set to the current minutes.

4.Press PROGRAM RUN .

To Set the Day:

5. Press SET DAY . The display will indicate a day of the week. Use TIME FWD or TIME BACK to set to the

current day of the week.

6.Press PROGRAM RUN .

To Set the Program:

7.Press the SYSTEM button to select HEAT (for heating program) or COOL (for cooling program).

8.Press PROGRAM VIEW one time. The display will show MOR, the settings for time and temperature and

MON.

12