|
| SENSOR |
| ||
| L |
| A |
| B |
MOR | AVG |
| HI |
| LO |
DAY | HI |
| AVG |
| LO |
EVE | HI |
| AVG |
| LO |
NHT | AVG |
| HI |
| LO |
In the MOR and NHT periods, the sensor on the upper level (sensor A) has more priority than the lower level (sensor L), so the system will operate to keep the temperature at the set point in the upper level. In the DAY and EVE periods, the lower level has the higher priority, so the system will operate to keep the temperature at the set point on that level. The sensor in the guest bedroom has the lower priority of the sensors. If there is a guest, the sensor in that room (sensor
B)should be changed to AVG or HI for periods when that room will be used. To assign priority to a sensor,
press PROGRAM VIEW to advance the time period you wish to modify, then press the HUMIDITY button. On the display in place of period of day (MOR, DAY, EVE, NHT) the priority of the sensor and the sensor identifica- tion will appear. Press the HUMID- ITY button to step through the sensors that are installed and enabled L (local), A, B or C. Only sensors that are installed and enabled will be listed. When the sensor you wish to change is displayed, press the DAYLIGHT
SAVING TIME key to change the priority (AVG, HI or LO). AVG is the
default setting. A setting of HI gives a sensor more importance and a setting of LO gives less importance.
Outdoor Temperature Sense.
(User menu, Step 16) A remote sensor
The sensor must be properly con- nected and enabled using the User menu. The display shows the outdoor temperature from
KEYPAD LOCKOUT MENU
The keypad lockout menu allows you to partially or totally lock out the keypad depending on your system or personal requirements. To enter the keypad lockout menu you must first enter the User Menu, while in the User
Menu press TIME | FWD | and TIME |
BACK the same time for at least one | ||
second. Press TIME | FWD | to |
advance through the menu options.
10