CONTROL A1 control
system
Getting Started
This section explains the basic functions of the CONTROL A1 Control System. Certain components have special functions, like “CD Synchro Dubbing” on cassette decks, that require CONTROL
A1 connections. For detailed information regarding specific operations, be sure to also refer to the Operating Instructions supplied with your component(s).
The CONTROL A1 Control System was designed to simplify the operation of audio systems composed of separate Sony components. CONTROL A1 connections provide a path for the transmission of control signals which enable automatic operation and control features usually associated with integrated systems.
Currently, CONTROL A1 connections between a Sony CD player, amplifier (receiver), MD deck and cassette deck provide automatic function selection and synchronized recording.
In the future, the CONTROL A1 connection will work as a multifunction bus allowing you to control various functions for each component.
Notes
•The CONTROL A1 Control System is designed to maintain upward compatibility as the Control System is upgraded to handle new functions. In this case, however, older components will not be compatible with the new functions.
•Do not operate a 2 way remote control unit when the CONTROL A1 jacks are connected via a PC interface kit to a personal computer running “MD Editor” or similar application. Also, do not operate the connected component in a manner contrary to the functions of the application, as this may cause the application to operate incorrectly.
CONTROL A1 and CONTROL A1 |
|
| |||
compatibility |
|
|
|
| |
The CONTROL A1 control system has been |
|
| |||
updated to the CONTROL A1 | which is the |
|
| ||
standard system in the Sony 300 disc CD changer |
|
| |||
and other recent Sony components. Components |
|
| |||
with CONTROL A1 jacks are compatible with |
|
| |||
components with CONTROL A1 | , and can be |
|
| ||
connected to each other. Basically, the majority of |
|
| |||
the functions available with the CONTROL A1 |
|
| |||
control system will be available with the |
|
| |||
CONTROL A1 control system. |
|
|
| ||
However, when making connections between |
|
| |||
components with CONTROL A1 jacks and |
|
| |||
components with CONTROL A1 | jacks, the |
|
| ||
number of functions that can be controlled may be |
|
| |||
limited depending on the component. For detailed |
|
| |||
information, refer to the operating instructions |
|
| |||
supplied with the component(s). |
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
Connections |
|
|
| Other | |
|
|
|
| ||
Connect monaural (2P) | Operations | ||||
series to the CONTROL A1 | jacks on the | ||||
| |||||
back of each component. You can connect up to 10 CONTROL A1 compatible components in any order. However, you can connect only one of each type of component (i.e., 1 CD player, 1 MD deck, 1 tape deck and 1 receiver).
(You may be able to connect more than one CD player or MD deck, depending on the model. Refer to the operating instructions supplied with the respective component for details.)
Example
Amplifier | CD | MD | Tape | Other |
(Receiver) | player | deck | deck | component |
In the CONTROL A1 | control system, the | |||
control signals flow both ways, so there is no distinction of IN and OUT jacks. If a component has more than one CONTROL A1 jack, you can use either one, or connect different components to each jack.
continued
53