Kenwood KDC-MP8017 English, Troubleshooting Guide, Problem, Possible Cause, Solution

Models: KDC-MP8017

1 47
Download 47 pages 27.71 Kb
Page 38
Image 38
Manual background

English

Troubleshooting Guide

PROBLEM

POSSIBLE CAUSE

SOLUTION

 

 

 

Can’t remove disc.

The cause is that more than 10 minutes has elapsed

The disc can only be removed within 10 minutes of the

 

since the vehicle ACC switch was turned OFF.

ACC switch being turned OFF. If more than 10 minutes

 

 

has elapsed, turn the ACC switch ON again and press

 

 

the Eject button.

 

 

 

Free switching of the sound

The system Q function is set on Scan mode.

Refer to the “System Q” page and switch it to a

quality.

 

function other than Scan mode. (see p. 12).

 

 

 

Audio control setting cannot be

The system Q function is set on Scan mode.

Refer to the “System Q” page and switch it to a

achieved.

 

function other than Scan mode.(see p. 12).

 

 

 

Cannot play an MP3 file.

Not conforming to ISO 9660 Level 1/2.

Use a medium conforming to ISO 9660 Level 1/2.

 

 

 

 

The MP3 file has no or invalid filename extension.

Add the ".MP3" extension to the MP3 file name.

 

 

 

 

The media is scratched or dirty.

Clean the media, referring to the section on "Cleaning

 

 

CDs" (see p.6).

 

 

 

Noise or no sound generated

The file has the MP3 filename extension while it is not an

Do not use the ".MP3" extension in non-MP3 files.

when an MP3 file is played.

MP3 file.

 

 

 

 

Takes time before the unit

The medium contains many folders, files, and hierarchical

The unit checks all files on the loaded medium first. If

starts playing MP3 files.

levels.

the medium has many files recorded, it may take a long

 

 

time for the unit before it starts playing MP3 files.

 

 

 

Fails to play MP3 files in the

The MP3 files were not written by the CD writer in the

Depending on the CD writer, you may be able to set the

intended order.

order in which you wanted them to be played.

order in which MP3 files are to be played by writing

 

 

them onto a medium with their file names beginning

 

 

with play sequence numbers such as "01" to "99".

 

 

 

The sound skips when an MP3

The media is scratched or dirty.

Clean the media, referring to the section on "Cleaning

file is being played.

 

CDs" (see p.6).

 

 

 

— 38 —

Page 38
Image 38
Kenwood KDC-MP8017 instruction manual English, Troubleshooting Guide, Problem, Possible Cause, Solution