Menu settings
English
Manual Time Adjustment
Adjust the time manually.
Display and setting:
1Select the display "Clock Adjust" during the selecting function in the menu system.
2Press either the 4 or ¢ button for at least one second to enter the Manual time adjustment mode.
The time display will blink.
3• Adjusting the hours
Press the FM button to advance the hours, or press the AM button to make the hours go back.
•Adjusting the minutes
Press the ¢ button to advance the minutes, or press the 4 button to make the minutes go back.
4Press the MENU button to end the Manual Time Adjustment mode.
Exiting the Manual Time Adjustment mode would start the clock counting.
Switching Graphic Display
This function allows you to turn off the lower part of the display if there is too much information in the display.
Display and setting:
"Graphic ON" : The display will turn on by using the whole part of the display. (Default setting)
"Graphic OFF" : The display will turn on by using only the upper part of the display and the IN indicator.
Contrast Adjustment
This adjustment permits easy viewing of the display.
Display and setting: "Contrast 0" – "Contrast 10"
NOTE
The initial setting value is "5".
Selectable Illumination
You can switch the color of the button illumination between green and red.
Display and setting:
"Button Green" : The color of the illumination is green.
"Button Red" : The color of the illumination is red.
Dimmer
You can dim the display.
NOTE
The dimmer function is not available for units if the dimmer wire is not connected.
Display and setting:
"Dimmer ON" : The dimmer setting is on. (Default setting)
"Dimmer OFF" : The dimmer setting is off.
— 30 —
