Connecting Wires to Terminals
2WARNING
If you connect the ignition wire (red) and the battery wire (yellow) to the car chassis (ground), you may cause a short circuit, that in turn may start a fire. Always connect those wires to the power source running through the fuse box.
2CAUTION
When only two speakers are being connected to the system, connect the connectors either to both the front output terminals or to both the rear output terminals (do not mix front and rear). For example, if you connect the + connector of the left speaker to a front output terminal, do not connect the - connector to a rear output terminal.
Rear right output (Red) 
Rear left output (White) 
Front right output (Red) 
Front left output (White) 
FM/AM antenna input
REARFRONT
To KENWOOD disc changer/ DAB control input/
NOTE
If no connections are made, do not let the wire come out from the tab. |
| ||
|
| Wiring harness |
|
When using the optional power amplifier, connect |
| (Accessory1) |
|
|
|
| |
to its power control terminal. | P.CONT. Power control wire (Blue/White) |
| |
Depending on what antenna you are using, connect |
|
|
|
either to the control terminal of the motor antenna, or | ANT. | Motor antenna control wire (Blue) |
|
to the power terminal for the booster amplifier of the | CONT. |
| |
|
|
| |
To car light control switch | ILLUMI | Dimmer control wire (Orange / White) |
|
|
|
| |
To connect these leads, refer to the relevant instruction manuals.
Fuse (10A)
White/Black
|
| To front left |
FRONT • L | + | speaker |
| White |
|
Gray/Black | To front right | |
|
| |
FRONT • R | + | speaker |
| Gray |
|
Ignition key switch
Car fuse box
(Main fuse)
Battery + | – |
ACC |
|
Car fuse box | Ignition wire (Red) |
| Battery wire (Yellow) |
Ground wire (Black) - (To car chassis)
Green/Black |
|
| |
|
| To rear left | |
REAR • L | + | speaker | |
Green |
| ||
Purple/Black |
| ||
REAR • R | + | To rear right | |
speaker | |||
| |||
Purple
