Kenwood KDC-MP8017 Playing Other Disc mode, Switching Display for Discs, Playing Discs

Models: KDC-MP8017

1 47
Download 47 pages 27.71 Kb
Page 19
Image 19
Playing Other Disc mode

NOTE

When you load a CD and eject it right away, the next time you try to insert the CD may not load. In such a situation, take the CD out for a moment and then reinsert it.

While the control panel is sliding, only available buttons are 0, ATT, ▲, ▼ and SRC.

Playing Other Disc mode

This function permits the connection of optional players and the playing of discs other than the loaded CD (in the current unit).

Playing Discs:

Press the SRC button repeatedly to select the external disc control mode.

The disc will start playing.

NOTE

The external disc control mode will differ, depending on the unit that is connected.

Mode Display Examples

"CD2" ...when a CD player is connected

"DISC" ...when a disc changer is connected

"DISC-1" , "DISC-2" ...when two disc changers are connected

Pausing and Restarting Disc Play:

Press the 38 button to make the disc pause.

Press the same button again to start play again.

NOTE

When one disc has finished playing its last track, the next disc in the changer will start playing. When the last disc in the changer has finished, the player will return to the first disc and start playing it.

Disc #10 is displayed as "0".

Switching Display for Discs

Switch the display that appears while discs are playing.

Switching Display for Discs:

Each time you press the DISP button, the display during disc play switches as follows:

Track time

Disc name (DNPS) (only when being preset)

Disc title (Units featuring CD text/MD only)

Track title (Units featuring CD text/MD only)

NOTE

You can give names to discs through the presetting disc name function (page 22). Note that depending on the unit, display may not be possible.

If you try to display the name of a disc that does not have one, "NO NAME" is displayed instead.

When there is an attempt to display the title of a disc for which the disc title/track title has not been recorded, "NO TEXT" is displayed for CD and "NO TITLE/NO NAME" is displayed for MD.

If you attempt to display disc title/track title when connecting the CD changer not supported for CD text feature, caution messages such as "NO TEXT" or "Reading" may be displayed.

Depending on the type of characters of the CD Text, some characters may not be displayable.

— 19 —

Page 19
Image 19
Kenwood KDC-MP8017 Playing Other Disc mode, Switching Display for Discs, Playing Discs, Pausing and Restarting Disc Play