Remote control
The remote does not function.
•Point the remote at the remote sensor on the receiver.
•Remove any obstacles in the path between the remote and the receiver.
•Replace all the batteries in the remote with new ones, if they are weak.
•If the receiver’s COMMAND MODE and the remote’s COMMAND MODE do not match, transmission is not possible between the remote and the receiver.
•Make sure you select the correct function on the remote.
•When you operate a programmed
The component names appearing in the function list do not correspond to the jacks on the receiver./The sound field list does not appear.
•The remote has not been initialized. Turn on the receiver, point the remote at the receiver, and press SOUND FIELD, FUNCTION, or SUB on the remote (see page 56).
Eappears in the display window of the remote.
•The batteries are running out. Replace all the batteries with new ones.
The function names that appear in the display windows of the receiver and the remote are different.
• Select the correct function using the remote.
When the CD player, tape deck, or MD deck is connected to the receiver via CONTROL A1/A1 jacks, Auto Function does not work properly.
• Reprogram the remote (see page 66).
Reference sections for clearing the memory
To clear | See |
All memorized settings | page 18 |
|
|
Customized sound fields | page 41 |
|
|
All the settings in the remote | page 75 |
|
|
Specifications
Amplifier section
Models of area code E:
Rated Power Output at Stereo Mode (8 ohms 20 Hz – 20 kHz, THD 0.05 %)
100 W + 100 W1)
(4 ohms 20 Hz – 20 kHz, THD 0.09 %) 90 W + 90 W1)
Reference Power Output
(8 ohms 20 Hz – 20 kHz, THD 0.05 %)
FRONT3): 100 W + 100 W
CENTER3): 100 W
SURR3): 100 W + 100 W
SURR BACK3): 100 W
(4 ohms 20 Hz – 20 kHz, THD 0.09 %)
FRONT3): 90 W + 90 W
CENTER3): 90 W
SURR3): 90 W + 90 W
SURR BACK3): 90 W
Models of area code CN, CEL: Rated Power Output at Stereo Mode (8 ohms 1 kHz, THD 0.7 %)
100 W + 100 W1)
90 W + 90 W2)
(4 ohms 1 kHz, THD 0.7 %)
90 W + 90 W1)
80 W + 80 W2)
Reference Power Output1) (8 ohms 1 kHz, THD 0.7 %)
FRONT3): 100 W + 100 W
CENTER3): 100 W
SURR3): 100 W + 100 W
SURR BACK3): 100 W
(4 ohms 1 kHz, THD 0.7 %)
FRONT3): 90 W + 90 W
CENTER3): 90 W
SURR3): 90 W + 90 W
SURR BACK3): 90 W
(8 ohms 20 Hz – 20 kHz, THD 0.05 %)
FRONT3): 90 W + 90 W
CENTER3): 90 W
SURR3): 90 W + 90 W
SURR BACK3): 90 W
(4 ohms 20 Hz – 20 kHz, THD 0.05 %)
FRONT3): 80 W + 80 W
CENTER3): 80 W
SURR3): 80 W + 80 W
SURR BACK3): 80 W
continued
Information Additional
79