xDUAL (Digital broadcast language selection)

Lets you select the language you want to listen to during digital broadcast. This feature only functions for Dolby Digital sources.

•DUAL M/S (Main/Sub)

Sound of the main language will be output through the front left speaker and sound of the sub language will be output through the front right speaker simultaneously.

•DUAL M (Main)

Sound of the main language will be output.

•DUAL S (Sub)

Sound of the sub language will be output.

•DUAL M+S (Main + Sub)

Mixed sound of both the main and sub languages will be output.

xA.V. SYNC. (Synchronizes audio with video output)

Lets you delay the audio output so that the time gap between the audio output and visual display is minimized. You can adjust from 0 (0 ms) to 20 (200 ms) in 1 (10 ms) steps.

Notes

•This parameter is useful when you use a large LCD or plasma monitor or a projector.

•This parameter is not valid when

–the multi-channel PCM signals are received via an HDMI IN jack.

–ANALOG DIRECT function is being used.

xD. ASSIGN (Digital audio input assignment)

Lets you assign the digital audio input to other input source. For details, see “Listening to digital sound from other inputs (DIGITAL ASSIGN)” (page 75).

Settings for the video

(VIDEO menu)

You can use the VIDEO menu to make various adjustments for HDMI settings, assign the composite video input to DMPORT input and to name inputs.

Select “6-VIDEO” in the amplifier menus. For details on adjusting the parameters, see “Navigating through menus” (page 39) and “Overview of the menus” (page 40).

VIDEO menu parameters

xDMPORT V. (DIGITAL MEDIA PORT video assign)

Lets you assign the composite video input to DMPORT input so that you can view the images in the TV. For details, see “Watching a connected component through DMPORT connection” (page 74).

xAUDIO (HDMI AUDIO)*

Lets you set the HDMI audio output from the playback component connected to the receiver via an HDMI connection.

•AMP

The HDMI audio signals from the playback component is only output to speakers connected to the receiver. Multi-channel sound can be played back as it is.

Note

Audio signals are not output from the TV’s speakers.

Operations Amplifier

xNAME IN (Naming inputs)

Lets you set the name of inputs. For details, see “Naming inputs” (page 76).

continued

47US