Press RM SET UP.
The RM SET UP indicator slowly flashes.

Using the Remote

Programming the remote

You can program the remote to control non- Sony components by changing the code. Once the control signals have been memorized, you can use those components as part of your system.

Furthermore, you can also program the remote for Sony components that the remote is unable to control. Note that the remote can only control components that accept infrared wireless control signals.

1

2 Press the input button for the component you want to control.

For example, if you are going to control a CD player, press SA-CD/CD. The RM SET UP indicator lights up.

3 Press the numeric buttons to enter the numeric code (or one of the codes if more than one code exists) corresponding to the component and the maker of the component you want to control (except TV).

See the tables on pages 80–84 for information on the numeric code(s) corresponding to the component and the maker of the component (the first digit and the last two digits of the numeric code correspond to the category and the maker’s code respectively.)

4 Press ENTER.

Once the numeric code has been verified, the RM SET UP indicator slowly flashes twice and the remote automatically exits the programming mode.

5 Repeat steps 1 to 4 to control other components.

Notes

•The indicator turns off while a valid button is pressed.

•In step 2, if several input buttons are pressed, only the last pressed button is valid.

•In step 2, if you press TUNER, you can only program the button to control a tuner (page 84).

•In step 3, if an input button is pressed, the new input is selected and the programming procedure returns to the beginning of step 3.

•For the numeric codes, only the last three numbers entered are valid.

To program the remote to control a TV

1 Press RM SET UP.

 

The RM SET UP indicator slowly flashes.

 

2 Press TV.

 

3 Press the numeric buttons to enter the

 

numeric code (or one of the codes if more

 

than one code exists) for TV. For details, see

 

page 82.

 

 

4 Press ENTER.

 

Using

Once the numeric code has been verified,

 

the RM SET UP indicator slowly flashes

 

twice and the remote automatically exits the

the

programming mode.

Remote

To cancel programming

 

Press RM SET UP during any step. The RM

 

SET UP indicator flashes 5 times in quick

 

succession. The remote automatically exits the

 

programming mode.

 

To activate the input after

 

programming

 

Press the programmed button to activate the

 

input you want.

 

continued

79US