Sony STRDH100 If you cannot tune in a station, Using the controls on the receiver, In case of poor FM stereo reception, Tuning into a station directly (Direct tuning)

You can also use MEMORY/ENTER on the receiver.

Tip

If you have tuned in an AM station, adjust the direction of the AM loop antenna (aerial) for optimum reception.

If you cannot tune in a station Make sure you have entered the right frequency. If not, repeat steps 2 to 4. If you still cannot tune in a station, the frequency is not used in your area.

Press ENTER.

4

Tuning into a station directly (Direct tuning)

You can enter the frequency of a station directly by using the numeric buttons.

1 Press TUNER repeatedly to select the FM or AM band.

You can also use INPUT SELECTOR on the receiver.

2 Press D.TUNING.

3 Press the numeric buttons to enter the frequency.

Example 1: FM 102.50 MHz Select 1 b 0 b 2 b 5 b 0 Example 2: AM 1,350 kHz Select 1 b 3 b 5 b 0

Tuning into a station automatically (Auto Tuning)

1

2

Press TUNER repeatedly to select the FM or AM band.

Press TUNING + or TUNING –.

Press TUNING + to scan from low to high; press TUNING – to scan from high to low.

The receiver stops scanning whenever a station is received.

Using the controls on the receiver

1Turn INPUT SELECTOR to select the FM or AM band.

2Press TUNING MODE repeatedly to select “AUTO T.”.

3Press TUNING + or TUNING –.

In case of poor FM stereo reception

If the FM stereo reception is poor and “ST” flashes on the display, select monaural audio so that the sound will be less distorted.

Press FM MODE repeatedly until the “MONO” indicator lights up on the display. To return to stereo mode, press FM MODE repeatedly until the “MONO” indicator on the display does not light up.

22GB