1 Press one of the input buttons to select the playback component.
You can also use INPUT SELECTOR on the receiver.
2 Prepare the playback component for playing.
For example, insert the video tape you want to copy into the VCR.
3 Prepare the recording component.
Insert a blank video tape, etc. into the recording component (VIDEO 1) for recording.
4 Start recording on the recording component, then start playback on the playback component.
Note
Some sources contain copy guards to prevent recording. In this case, you may not be able to record from the source.
If you are not using surround back speakers, you can connect the front speakers to the
SPEAKERS SURROUND
Front speaker | Front speaker |
(R) | (L) |
Hi |
|
| Hi |
Lo |
|
| Lo |
| CENTER |
| SURROUND |
|
| R | L |
SURROUND BACK/ |
|
|
|
|
|
| |
FRONT B |
|
|
|
|
|
| FRONT A |
R | L | R | L |
SPEAKERS
Connect the jacks on the Lo (or Hi) side of the front speakers to the SPEAKERS FRONT A terminals, and connect the jacks on the Hi (or Lo) side of the front speakers to the
SPEAKERS SURROUND
Make sure that metal fittings of Hi/Lo attached to the speakers have been removed from the speakers. Not doing so may cause a malfunction of the receiver.
100US