Guarantee & Guarantee Policy

Guarantee & Guarantee Policy

If any part is found to be defective due to faulty manufacture within the guarantee period, Husqvarna UK Ltd., through its Authorised Service Repairers will effect the repair or replacement to the customer free of charge providing:

(a)The fault is reported directly to the Authorised Repairer.

(b)Proof of purchase is provided.

(c)The fault is not caused by misuse, neglect or faulty adjustment by the user.

(d)The failure has not occurred through fair wear and tear.

(e)The machine has not been serviced or repaired, taken apart or tampered with by any person not authorised by Husqvarna UK Ltd.

(f)The machine has not been used for hire.

(g)The machine is owned by the original purchaser.

(h)The machine has not been used commercially.

*This guarantee is additional to, and in no way

diminishes the customers statutory rights.

Failures due to the following are not covered, therefore it is important that you read the instructions contained in this Operator's Manual and understand how to operate and maintain your machine:

Failures not covered by guarantee

*Replacing worn or damaged blades.

*Failures as a result of not reporting an initial fault.

*Failures as a result of sudden impact.

*Failures as a result of not using the product in accordance with the instructions and recommendations contained in this Operator's Manual.

*Machines used for hire are not covered by this guarantee.

*The following items listed are considered as wearing parts and their life is dependent on regular maintenance and are, therefore not normally subject to a valid warranty claim: Blades, Electric Mains cable

*Caution!

Husqvarna UK Ltd. does not accept liability under the warranty for defects caused in whole or part, directly or indirectly by the fitting of replacement parts or additional parts that are not either manufactured or approved by Husqvarna UK Ltd., or by the machine having been modified in any way.

EC Declaration of Conformity

Husqvarna AB, 561 82, Huskvarna, Sweden

Declare under our sole responsibility that the product(s);

Category

Electric Rotary Lawnmower

Type(s)

MM340XC, MM360, MM360XC, MM420, MM420XC

Identification of Series

See Product Rating Label

Year of Construction

See Product Rating Label

Conforms to the essential requirements & provisions of the following EC Directives:

98/37/EC (until 28.12.09), 2006/42/EC (from 29.12.09), 2004/108/EC, 2000/14/EC based on the following EU harmonized standards applied:

EN60335-1, EN60335-2-77, EN836, EN50366, EN55014-1, EN61000-3-2, EN61000-3-3

The maximum A weighted sound pressure level LpA at the operator’s position, recorded on a sample of the above

product(s) corresponds to the Level given in the table.

The maximum hand / arm vibration weighted value measured according to EN ISO 5349 on a sample of the above product(s) corresponds to the Value ah given in the table.

2000/14/EC: The Measured Sound Power LWA & Guaranteed Sound Power LWA values are according to the tabulated

figures.

Conformity Assessment Procedure.................. Annex VI

Notified Body.................................................... Intertek, Cleeve Road

Leatherhead, Surrey

KT22 7SB, England

Newton Aycliffe 25/11/2009

M.Bowden

Research & Development Director

Husqvarna UK Ltd.

Keeper of technical documentation

Type

MM340XC

MM360

MM360XC

MM420

MM420XC

Width of Cut (cm)

34

36

36

42

42

Speed of Rotation of Cutting Device (rpm)

3,850

3,850

3,850

3,600

3,600

Power (kW)

1.5

1.5

1.5

1.7

1.7

Measured Sound Power LWA (dB(A))

93

93

93

95

95

Guaranteed Sound Power LWA (dB(A))

96

96

96

96

96

Level (dB(A))

80.4

80.4

80.4

84.9

84.9

Value ah (m/s2)

1.56

1.56

1.56

1.53

1.53

Uncertainty K of ah (m/s2)

1.5

1.5

1.5

1.5

1.5

Weight (Kg)

12.8

12.4

12.8

13.1

14.7

Our policy of continuous improvement means that the specification of products may be altered from time to time without prior notice.

Copyright © 2008 Flymo S.A. All rights reserved. Flymo® and other product and feature names are registered or unregistered

trademarks of Flymo S.A.

Husqvarna AB

56182

Huskvarna

5100693-02

Sweden

Page 12
Image 12
Flymo 420XC Guarantee & Guarantee Policy, EC Declaration of Conformity, 5100693-02, Type, MM340XC, MM360XC, MM420

340XC, 420XC, 420, 360, 360XC specifications

The Flymo EASICUT 500 and EASICUT 420 are innovative cordless electric hedge trimmers designed for maintenance and care of hedges and shrubs in residential gardens. These models are recognized for their efficiency, maneuverability, and user-friendly features, making garden upkeep a less daunting task.

One of the standout features of the Flymo EASICUT 500 and EASICUT 420 is the lightweight design, allowing users to handle the trimmers with ease even during extended periods of use. Weighing significantly less than many traditional hedge trimmers, both models provide comfort and reduced fatigue, making them ideal for both professional landscapers and home gardeners.

Both trimmers are equipped with laser-cut precision blades, which ensure a clean and smooth cut. This not only enhances the appearance of hedges and shrubs but also promotes healthier plant growth by preventing jagged edges. The EASICUT 500 boasts a blade length of 50 cm, while the EASICUT 420 has a slightly shorter 42 cm blade, catering to different garden sizes and trimming requirements.

The trimmers feature ergonomic handles designed for optimal grip and control. This thoughtful design reduces the likelihood of strain and discomfort during operation. Furthermore, they include a safety switch that ensures the device only operates when intended, enhancing user safety.

Powering the Flymo EASICUT series is an efficient battery system that delivers impressive run time with a quick charging capability. This cordless technology frees users from the hassle of tangled cords, allowing for unrestricted movement around the garden. The EASICUT series also has a low noise operation, making it perfect for use in residential areas without disturbing neighbors.

Additionally, the EASICUT models are designed with a protective blade guard, ensuring safe storage and transportation. This feature further extends the longevity of the blades by preventing accidental damage.

Overall, the Flymo EASICUT 500 and EASICUT 420 are excellent choices for those seeking efficient, lightweight, and user-friendly hedge trimmers. With their advanced technology, safety features, and precision cutting capabilities, these trimmers are well-suited to help you maintain a beautiful and healthy garden with ease.